SN75LBC968 具有有源终端的 9 通道总线收发器
The SN75LBC968 is a nine-channel transceiver with active termination that drives and receives the signals from the single-ended, parallel data buses such as the Small Computer-Systems Interface (SCSI) bus. The features of the line drivers, receivers, and active-termination circuits provide the optimum signal-to-noise ratios for reliable data transmission. Integration of the termination and transceivers in the LinBiCMOS™ process provides the necessary analog-circuit performance, has low quiescent power, and reduces the capacitance presented to the bus over separate termination and I/O circuits.
The transceivers of the SN75LBC968 can be enabled to function as totem-pole or open-drain outputs. The open-drain mode drives the wired-OR lines of SCSI (BSY, SEL, and RST) by inputting the data to the direction control input DE/RE instead of the A input
|
SN75LBC968 |
| Drivers Per Package |
9 |
| Receivers Per Package |
9 |
| Supply Voltage(s)(V) |
5 |
| Temp Range(C) |
0 to 70 |
| Signaling Rate(Mbps) |
10 |
| ICC(Max)(mA) |
45 |
| Isolated |
No |
| # of TX/RX |
9 TX / 9 RX |
| Comments |
Single-Ended SCSI: 10 Mbps, with Active Termination |
| Pin/Package |
56SSOP |
| Rating |
Catalog |
SN75LBC968 特性
- Nine Single-Ended SCSI Transceiver Channels With Active Termination
- Programmable Drivers Provide Active Negation (Totem Pole) or Wired-OR (Open Drain) Outputs
- 24-mA Current-Mode Active Termination With Common Nine-Channel Bus Enable
- Low Output Capacitance Presented to SCSI Bus, 13.5 pF Typ
- 3.3 V Compatible Logic Inputs Provide Bridge from 3 V Controllers to 5 V SCSI Bus
- Designed to Operate at 10-Million Data Transfers Per Second (Fast-SCSI)
- Controlled Driver Rise and Fall Times
5 ns Min
- High-Receiver Input-Voltage Hysteresis
500 mV Typ
- Receiver Input-Noise Pulse Filter
5 ns Typ
- Each Driver and Receiver Meets ANSI X3.131-1994 (SCSI-2) and the Proposed SCSI-3 Standards
- Power-Up/Power-Down Glitch Protection
- High Impedance Driver With VCC at 0 V
SN75LBC968 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| SN75LBC968DL |
ACTIVE |
0 to 70 |
11.60 | 1ku |
SSOP (DL) | 56 |
20 | TUBE |
|
| SN75LBC968DLG4 |
ACTIVE |
0 to 70 |
11.60 | 1ku |
SSOP (DL) | 56 |
20 | TUBE |
|
| SN75LBC968DLR |
ACTIVE |
|
9.60 | 1ku |
SSOP (DL) | 56 |
1000 | LARGE T&R |
|
| SN75LBC968DLRG4 |
ACTIVE |
|
9.60 | 1ku |
SSOP (DL) | 56 |
1000 | LARGE T&R |
|
SN75LBC968 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| SN75LBC968DL |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-2-260C-1 YEAR |
SN75LBC968DL |
SN75LBC968DL |
| SN75LBC968DLG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-2-260C-1 YEAR |
SN75LBC968DLG4 |
SN75LBC968DLG4 |
| SN75LBC968DLR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-2-260C-1 YEAR |
SN75LBC968DLR |
SN75LBC968DLR |
| SN75LBC968DLRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-2-260C-1 YEAR |
SN75LBC968DLRG4 |
SN75LBC968DLRG4 |
SN75LBC968 应用技术支持与电子电路设计开发资源下载
- SN75LBC968 数据资料 dataSheet 下载.PDF
- TI 德州仪器RS-485选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
SN75LBC968 工具和软件
