SN75LPE185 具有使能端的低功耗多路驱动器和接收器
The SN75LPE185 is a low-power bipolar device containing three drivers and five receivers, with 15-kV ESD protection on the bus pins, with respect to each other. Bus pins are defined as those pins that tie directly to the serial-port connector, including GND. The pinout matches the flow-through design of the industry-standard SN75185, SN75C185, and SN75LP185, with the addition of four pins for control signals. The flow-through pinout of the device allows easy interconnection of the universal asynchronous receiver/transmitter (UART) and serial-port connector of the IBM™ PC compatibles. The SN75LPE185 provides a rugged, low-cost solution for this function, with the combination of bipolar processing and 15-kV ESD protection.
|
SN75LPE185 |
| Data Rate(kbps) |
256 |
| Drivers Per Package |
3 |
| Receivers Per Package |
5 |
| ESD HBM(kV) |
+/-15 |
| Supply Voltage(s)(V) |
+/-12.0 & 5.0 |
| ICC(Max)(mA) |
+0.8/-0.625 & 1 |
| Operating Temperature Range(°C) |
0 to 70 |
| Pin/Package |
24PDIP, 24SOIC, 24TSSOP |
| Approx. Price (US$) |
2.30 | 1ku |
| Rating |
Catalog |
| Footprint |
SN75LP185 |
SN75LPE185 特性
- Single-Chip RS-232 Interface for IBM™ PC-Compatible Serial Port
- Designed to Transmit and Receive 4-us Pulses (Equivalent to 256 kbit/s)
- Standby Power Is Less Than 750 uW Maximum
- Wide Supply-Voltage Range . . . 4.75 V to 15 V
- Driver Output Slew Rates Are Internally Controlled to 30 V/us Maximum
- RS-232 Bus-Pin ESD Protection Exceeds:
- Receiver Input Hysteresis . . . 1000 mV Typical
- Three Drivers and Five Receivers Meet or Exceed the Requirements of TIA/EIA-232-F and ITU v.28 Standards
- Complements the SN75LP196
- One Receiver Remains Active During WAKE-UP Mode (100 uA Maximum)
- Matches Flow-Through Pinout of Industry-Standard SN75185, SN75C185, and SN75LP185, With Additional Control Pins
- Package Options Include Plastic Shrink Small-Outline (DB), Small-Outline (DW), and Thin Shrink Small-Outline (PW) Packages, and Standard Plastic (NT) DIPs
SN75LPE185 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| SN75LPE185DWR |
ACTIVE |
0 to 70 |
1.10 | 1ku |
SOIC(DW) | 24 |
2000 | LARGE T&R |
SN75LPE185 |
| SN75LPE185DWRE4 |
ACTIVE |
0 to 70 |
1.10 | 1ku |
SOIC(DW) | 24 |
2000 | LARGE T&R |
SN75LPE185 |
| SN75LPE185DWRG4 |
ACTIVE |
0 to 70 |
1.10 | 1ku |
SOIC(DW) | 24 |
2000 | LARGE T&R |
SN75LPE185 |
SN75LPE185 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| SN75LPE185DWR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75LPE185DWR |
SN75LPE185DWR |
| SN75LPE185DWRE4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75LPE185DWRE4 |
SN75LPE185DWRE4 |
| SN75LPE185DWRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75LPE185DWRG4 |
SN75LPE185DWRG4 |
SN75LPE185 应用技术支持与电子电路设计开发资源下载
- SN75LPE185 数据资料 dataSheet 下载.PDF
- TI 德州仪器RS-232 产品选型与价格 . xls
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
