TB5T1 5V 双路全双工 PECL 收发器
The TB5T1 device is a dual differential driver/receiver circuit that transmits and receives digital data over balanced transmission lines. The dual drivers translate input TTL logic levels to differential pseudo-ECL output levels. The dual receivers convert differential-input logic levels to TTL output levels. Each driver or receiver pair has its own common enable control allowing serial data and a control clock to be transmitted and received on a single integrated circuit. The TB5T1 requires the customer to supply termination resistors on the circuit board.
The power-down loading characteristics of the receiver input circuit are approximately 8 k
relative to the power supplies; hence, it does not load the transmission line when the circuit is powered down
| TB5D1M | TB5T1 | TB5R3 | |
| Input Signal | TTL | TTL | PECL |
| Output Signal | PECL | PECL | TTL |
| No. of Rx | 4 | ||
| No. of Tx | 4 | 4 | |
| Supply Voltage(s)(V) | 5 | 5 | 5 |
| ICC(Max)(mA) | 40 | 40 | 50 |
| Rx tpd(Typ)(ns) | 3.5 | ||
| Tx tpd(Typ)(ns) | 7 | 7 | |
| Part-to-Part Skew(Max)(ps) | 1000 | 1000 | 1500 |
| Operating Temperature Range(�C) | -40 to 85 | -40 to 85 | -40 to 85 |
| Pin/Package | 16SOIC | 16SOIC | 16SOIC |
TB5T1 特性
- Functional Replacement for the Agere BTF1A
- Driver Features
- Third-State Logic Low Output
- ESD Protection HBM > 3 kV, CDM > 2 kV
- No Line Loading when VCC = 0
- Capable of Driving 50- loads
- 2.0-ns Maximum Propagation Delay
- 0.2-ns Output Skew (typical)
- Receiver Features
- High-Input Impedance Approximately 8 k
- 4.0-ns Maximum Propagation Delay
- 50-mV Hysteresis
- Slew Rate Limited (1 ns min 80% to 20%)
- ESD Protection HBM > 3 kV, CDM > 2 kV
- -1.1-V to 7.1-V Input Voltage Range
- High-Input Impedance Approximately 8 k
- Common Device Features
- Common Enable for Each Driver/Receiver Pair
- Operating Temperature Range: -40°C to 85°C
- Single 5.0 V ± 10% Supply
- Available in Gull-Wing SOIC (JEDEC MS-013, DW) and SOIC (D) Package
TB5T1 芯片订购指南
| 器件 | 状态 | 温度 | 价格 | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| TB5T1D | ACTIVE | -40 to 85 | 12.80 | 1ku | SOIC (D) | 16 | 40 | TUBE | |
| TB5T1DE4 | ACTIVE | -40 to 85 | 12.80 | 1ku | SOIC (D) | 16 | 40 | TUBE | |
| TB5T1DR | ACTIVE | -40 to 85 | 10.80 | 1ku | SOIC (D) | 16 | 2500 | LARGE T&R | |
| TB5T1DRE4 | ACTIVE | -40 to 85 | 10.80 | 1ku | SOIC (D) | 16 | 2500 | LARGE T&R |
TB5T1 质量与无铅数据
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| TB5T1D | Pb-Free (RoHS) | CU NIPDAU | Level-2-250C-1YEAR/Level-1-220C-UNLIM | TB5T1D | TB5T1D |
| TB5T1DE4 | Pb-Free (RoHS) | CU NIPDAU | Level-2-250C-1YEAR/Level-1-220C-UNLIM | TB5T1DE4 | TB5T1DE4 |
| TB5T1DR | Pb-Free (RoHS) | CU NIPDAU | Level-2-250C-1YEAR/Level-1-220C-UNLIM | TB5T1DR | TB5T1DR |
| TB5T1DRE4 | Pb-Free (RoHS) | CU NIPDAU | Level-2-250C-1YEAR/Level-1-220C-UNLIM | TB5T1DRE4 | TB5T1DRE4 |
TB5T1 应用技术支持与电子电路设计开发资源下载
- TB5T1 数据资料 dataSheet 下载.PDF
- TI 德州仪器PECL PHY选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
TB5T1 工具和软件
| 培训内容 | 型号 | 软件/工具类型 |
| TB5T1 评估模块 | TB5T1EVM | 开发电路板/EVM |
