TL16C2752 具有 64 字节 FIFO 的双路 UART
The TL16C2752 is a speed and functional upgrade of the TL16C2552. Since they are pinout and software compatible, designs can easily migrate from the TL16C2552 to the TL16C2752 if needed. The additional functionality within the TL16C2752 is accessed via an extended register set. Some of the key new features are larger receive and transmit FIFOs, embedded IrDA encoders and decoders, RS-485 transceiver controls, software flow control (Xon/Xoff) modes, programmable transmit FIFO thresholds, extended receive and transmit threshold levels for interrupts, and extended receive threshold levels for flow control halt/resume operation.
The TL16C2752 is a dual universal asynchronous receiver and transmitter (UART). It incorporates the functionality of two independent UARTs: each UART having its own register set and transmit and receive FIFOs
|
TL16C2752 |
| Number of Channels |
2 |
| FIFOs(bytes) |
64 |
| Operating Voltage(V) |
1.8, 2.5,3.3,5 |
| Operating Temperature Range(C) |
-40 to 85,0 to 70 |
| Pin/Package |
44PLCC |
| Rating |
Catalog |
| Tx / Rx FIFO INT Trig |
Prog. / Prog. |
| Auto RTS/CTS |
Yes |
| CPU Interface |
X86 |
| Baud Rate (max) at Vcc = 1.8V and with 16X Sampling(Mbps) |
1.0 |
| Baud Rate (max) at Vcc = 2.5V and with 16X Sampling(Mbps) |
1.5 |
| Baud Rate (max) at Vcc = 3.3V and with 16X Sampling(Mbps) |
2.0 |
| Baud Rate (max) at Vcc = 5.0V and with 16X Sampling(Mbps) |
3.0 |
TL16C2752 特性
- Larger FIFOs Reduce CPU Overhead
- Programmable Auto-RTS and Auto-CTS
- In Auto-CTS Mode, CTS Controls the Transmitter
- In Auto-RTS Mode, RCV FIFO Contents, and Threshold Control RTS
- Serial and Modem Control Outputs Drive a RJ11 Cable Directly When Equipment is on the Same Power Drop
- Capable of Running With All Existing TL16C450 Software
- After Reset, All Registers Are Identical to the TL16C450 Register Set
- Up to 48-MHz Clock Rate for up to 3-Mbps (Standard 16× Sampling) Operation, or up to
6-Mbps (Optional 8× Sampling) Operation With VCC = 5 V Nominal
- Up to 32-MHz Clock Rate for up to 2-Mbps (Standard 16× Sampling) Operation, or up to
4-Mbps (Optional 8× Sampling) Operation With VCC = 3.3 V Nominal
- Up to 24-MHz Clock Rate for up to 1.5-Mbps (Standard 16× Sampling) Operation, or up to
3-Mbps (Optional 8× Sampling) Operation With VCC = 2.5 V Nominal
- Up to 16-MHz Clock Rate for up to 1-Mbps (Standard 16× Sampling) Operation, or up to 2-Mbps (Optional 8× Sampling) Operation With VCC = 1.8 V Nominal
- In TL16C450 Mode, Hold and Shift Registers Eliminate the Need for Precise Synchronization Between the CPU and Serial Data
- Programmable Baud-Rate Generator Allows Division of Any Input Reference Clock by 1 to (216 – 1) and Generates an Internal 16× Clock
- Standard Asynchronous Communication Bits (Start, Stop, and Parity) Added to or Deleted From the Serial Data Stream
- 5-V, 3.3-V, 2.5-V, and 1.8-V Operation
- Independent Receiver Clock Input
- Transmit, Receive, Line Status, and Data Set Interrupts Independently Controlled
- Fully Programmable Serial Interface Characteristics
- 5-, 6-, 7-, or 8-Bit Characters
- Even-, Odd-, or No-Parity Bit Generation and Detection
TL16C2752 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| TL16C2752FN |
ACTIVE |
0 to 70 |
3.50 | 1ku |
PLCC (FN) | 44 |
26 | TUBE |
|
| TL16C2752FNG4 |
ACTIVE |
0 to 70 |
3.50 | 1ku |
PLCC (FN) | 44 |
26 | TUBE |
|
| TL16C2752FNR |
ACTIVE |
0 to 70 |
2.90 | 1ku |
PLCC (FN) | 44 |
500 | LARGE T&R |
|
| TL16C2752FNRG4 |
ACTIVE |
0 to 70 |
2.90 | 1ku |
PLCC (FN) | 44 |
500 | LARGE T&R |
|
TL16C2752 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| TL16C2752FN |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TL16C2752FN |
TL16C2752FN |
| TL16C2752FNG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TL16C2752FNG4 |
TL16C2752FNG4 |
| TL16C2752FNR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TL16C2752FNR |
TL16C2752FNR |
| TL16C2752FNRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TL16C2752FNRG4 |
TL16C2752FNRG4 |
TL16C2752 应用技术支持与电子电路设计开发资源下载
- TL16C2752 数据资料 dataSheet 下载.PDF
- TI 德州仪器UART选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 高性能SERDES及其在CPRI 接口的应用分析 (zhca076.HTM, 8 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
TL16C2752 工具和软件
