TL16C452 具有并行端口但没有 FIFO 的双路 UARTT
The TL16C451 and TL16C452 provide single- and dual-channel (respectively) serial interfaces along with a single Centronix-type parallel-port interface. The serial interfaces provide a serial-to-parallel conversion for data received from a peripheral device or modem and a parallel-to-serial conversion for data transmitted by a CPU. The parallel interface provides a bidirectional parallel data port that fully conforms to the requirements for a Centronix-type printer interface. A CPU can read the status of the asynchronous communications element (ACE) interfaces at any point in the operation. The status includes the state of the modem signals (CTS\, DSR\, RLSD\, and RI) and any changes to these signals that have occurred since the last time they were read, the state of the transmitter and receiver including errors detected on received data, and printer status.
|
TL16C452 |
| Number of Channels |
2 |
| FIFOs(bytes) |
0 |
| Operating Voltage(V) |
5 |
| Pin/Package |
68PLCC |
| Rating |
Catalog |
| Tx / Rx FIFO INT Trig |
No / No |
| Auto RTS/CTS |
No |
| CPU Interface |
X86 |
| Baud Rate (max) at Vcc = 5.0V and with 16X Sampling(Mbps) |
0.256 |
TL16C452 特性
- Integrates Most Communications Card Functions From the IBM PC/ATTM or Compatibles With Single- or Dual-Channel Serial Ports
- TL16C451 Consists of One TL16C450 Plus Centronix Printer Interface
- TL16C452 Consists of Two TL16C450s Plus a Centronix-Type Printer Interface
- Fully Programmable Serial Interface Characteristics:
- 5-, 6-, 7-, or 8-Bit Characters
- Even-, Odd-, or No-Parity Bit Generation and Detection
- 1-, 1 1/2-, or 2 Stop-Bit Generation
- Programmable Baud Rate
(dc to 256 kbit/s)
- Fully Double Buffered for Reliable
Asynchronous Operation
TL16C452 芯片订购指南
TL16C452 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| TL16C452FN |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TL16C452FN |
TL16C452FN |
| TL16C452FNG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TL16C452FNG4 |
TL16C452FNG4 |
| TL16C452FNR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TL16C452FNR |
TL16C452FNR |
| TL16C452FNRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TL16C452FNRG4 |
TL16C452FNRG4 |
TL16C452 应用技术支持与电子电路设计开发资源下载
- TL16C452 数据资料 dataSheet 下载.PDF
- TI 德州仪器UART选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 高性能SERDES及其在CPRI 接口的应用分析 (zhca076.HTM, 8 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
TL16C452 工具和软件
