TNETE2201B 1.25 千兆以太网收发器
The TNETE2201B gigabit Ethernet transceiver provides for ultra high-speed bidirectional point-to-point data transmission. This device is based on the timing requirements of the proposed 10-bit interface specification by the P802.3z Gigabit Task Force.
The intended application of this device is to provide building blocks for developing point-to-point baseband data transmission over controlled-impedance media of approximately 50 
. The transmission media can be printed-circuit board traces, back planes, cables, or fiber optical media. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.
The TNETE2201B performs the data serialization and deserialization (SERDES) functions for the gigabit ethernet physical layer interface
|
TNETE2201B |
| Gbps per Serial Channel(Min) |
1.25 |
| Gbps per Serial Channel(Max) |
1.25 |
| ICC(Max)(mA) |
260 |
| IIH(Max)(uA) |
900 |
| IIL(Max)(uA) |
-900 |
| Power Consumption(Nom)(mW) |
594 |
| Number of Serial Channels |
4 |
| Parallel Bus Width |
10 |
| Parallel I/F |
LVTTL |
| Serial I/F |
LVPECL |
| Operating Temperature Range(C) |
0 to 70 |
| Pin/Package |
64HTQFP |
| VCC(Min)(V) |
3.14 |
| VCC(Max)(V) |
3.47 |
| VCC(Nom)(V) |
3.3 |
| VIH(Min)(V) |
2 |
| VIH(Max)(V) |
5.5 |
| VIL(Max)(V) |
0.8 |
TNETE2201B 特性
- 1.25 Gigabits Per Second (Gbps) Gigabit Ethernet Transceiver
- Based on the P802.3Z Specification
- Transmits Serial Data up to 1.25 Gbps
- Operates With 3.3-V Supply Voltage
- 5-V Tolerant on TTL Inputs
- Interfaces to Electrical Cables/Backplane or Optical Modules
- PECL Voltage Differential Signaling Load, 1 V Typ With 50
- Receiver Differential Input Voltage 200 mV Minimum
- Low Power Consumption
- 64-Pin Quad Flat Pack With Thermally Enhanced Package
TNETE2201B 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| TNETE2201BPHD |
ACTIVE |
0 to 70 |
4.50 | 1ku |
HTQFP (PHD) | 64 |
90 | EIAJ TRAY (10+1) |
|
| TNETE2201BPHDG4 |
ACTIVE |
0 to 70 |
4.50 | 1ku |
HTQFP (PHD) | 64 |
90 | EIAJ TRAY (10+1) |
|
| TNETE2201BPJD |
ACTIVE |
0 to 70 |
4.50 | 1ku |
HTQFP (PJD) | 64 |
160 | JEDEC TRAY (10+1) |
|
| TNETE2201BPJDG4 |
ACTIVE |
0 to 70 |
4.50 | 1ku |
HTQFP (PJD) | 64 |
160 | JEDEC TRAY (10+1) |
|
| TNETE2201BPJDR |
ACTIVE |
|
3.75 | 1ku |
HTQFP (PJD) | 64 |
1000 | LARGE T&R |
|
| TNETE2201BPJDRG4 |
ACTIVE |
|
3.75 | 1ku |
HTQFP (PJD) | 64 |
1000 | LARGE T&R |
|
| TNETE2201BPJW |
ACTIVE |
0 to 70 |
4.50 | 1ku |
HTQFP (PJW) | 64 |
160 | JEDEC TRAY (10+1) |
|
| TNETE2201BPJWG4 |
ACTIVE |
0 to 70 |
4.50 | 1ku |
HTQFP (PJW) | 64 |
160 | JEDEC TRAY (10+1) |
|
| TNETE2201BPJWR |
ACTIVE |
0 to 70 |
3.75 | 1ku |
HTQFP (PJW) | 64 |
1000 | LARGE T&R |
|
| TNETE2201BPJWRG4 |
ACTIVE |
0 to 70 |
3.75 | 1ku |
HTQFP (PJW) | 64 |
1000 | LARGE T&R |
|
TNETE2201B 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| TNETE2201BPHD |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TNETE2201BPHD |
TNETE2201BPHD |
| TNETE2201BPHDG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TNETE2201BPHDG4 |
TNETE2201BPHDG4 |
| TNETE2201BPJD |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TNETE2201BPJD |
TNETE2201BPJD |
| TNETE2201BPJDG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TNETE2201BPJDG4 |
TNETE2201BPJDG4 |
| TNETE2201BPJDR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TNETE2201BPJDR |
TNETE2201BPJDR |
| TNETE2201BPJDRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TNETE2201BPJDRG4 |
TNETE2201BPJDRG4 |
| TNETE2201BPJW |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TNETE2201BPJW |
TNETE2201BPJW |
| TNETE2201BPJWG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TNETE2201BPJWG4 |
TNETE2201BPJWG4 |
| TNETE2201BPJWR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TNETE2201BPJWR |
TNETE2201BPJWR |
| TNETE2201BPJWRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TNETE2201BPJWRG4 |
TNETE2201BPJWRG4 |
TNETE2201B 应用技术支持与电子电路设计开发资源下载
- TNETE2201B 数据资料 dataSheet 下载.PDF
- TI 德州仪器串行器和解串器选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 高性能SERDES及其在CPRI 接口的应用分析 (zhca076.HTM, 8 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
TNETE2201B 工具和软件
