TPIC8101 敲击传感器接口
The TPIC8101 is a dual-channel signal processing IC for detection of premature detonation in combustion engine. The two sensor channels are selectable through the SPI bus. The knock sensor typically provides an electrical signal to the amplifier inputs. The sensed signal is processed through a programmable band-pass filter to extract the frequency of interest (engine knock or ping signals). The band-pass filter eliminates any engine background noise associated with combustion. The engine background noise is typically low in amplitude compared to the predetonation noise.
The detected signal is full-wave rectified and integrated by use of the INT/HOLD signal. The digital output from the integration stage is either converted to an analog signal, passed through an output buffer, or be read directly by the SPI
|
TPIC8101 |
| Vdd(Max)(V) |
7 |
| Idd(q)(Max)(mA) |
7.5 |
| Idd(Max)(mA) |
20 |
| Fs(Typ)(kHz) |
200 |
| ADC Resolution(Min)(Bits) |
10 |
| DAC: Resolution(Min)(Bits) |
10 |
| fBP(kHz) |
1.2 to 20 |
| Pin/Package |
20SOIC |
TPIC8101 特性
- Dual-Channel Knock Sensor Interface
- Programmable Input Frequency Prescaler (OSCIN)
- Serial Interface With Microprocessor (SPI)
- Programmable Gain
- Programmable Band-Pass Filter Center Frequency
- External Clock Frequencies up to 24 MHz
- 4, 5, 6, 8, 10, 12, 16, 20, and 24 MHz
- Programmable Integrator Time Constants
- Operating Temperature Range –40°C to 125°C
- applications
- Engine Knock Detector Signal Processing
- Analog Signal Processing With Filter Characteristics
TPIC8101 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| TPIC8101DW |
ACTIVE |
-40 to 125 |
2.90 | 1ku |
SOIC (DW) | 20 |
25 | TUBE |
|
| TPIC8101DWE4 |
ACTIVE |
0 to 70 |
1.75 | 1ku |
SOIC (DW) | 20 |
25 | TUBE |
|
| TPIC8101DWG4 |
ACTIVE |
|
2.90 | 1ku |
SOIC (DW) | 20 |
25 | TUBE |
|
| TPIC8101DWR |
ACTIVE |
-40 to 125 |
2.90 | 1ku |
SOIC (DW) | 20 |
2000 | LARGE T&R |
|
| TPIC8101DWRE4 |
ACTIVE |
0 to 70 |
1.45 | 1ku |
SOIC (DW) | 20 |
2000 | LARGE T&R |
|
| TPIC8101DWRG4 |
ACTIVE |
|
2.90 | 1ku |
SOIC (DW) | 20 |
2000 | LARGE T&R |
|
| TPIC8101N |
ACTIVE |
0 to 70 |
1.60 | 1ku |
PDIP (N) | 20 |
20 | TUBE |
|
| TPIC8101NE4 |
ACTIVE |
0 to 70 |
1.60 | 1ku |
PDIP (N) | 20 |
20 | TUBE |
|
TPIC8101 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| TPIC8101DW |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
TPIC8101DW |
TPIC8101DW |
| TPIC8101DWE4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
TPIC8101DWE4 |
TPIC8101DWE4 |
| TPIC8101DWG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
TPIC8101DWG4 |
TPIC8101DWG4 |
| TPIC8101DWR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
TPIC8101DWR |
TPIC8101DWR |
| TPIC8101DWRE4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
TPIC8101DWRE4 |
TPIC8101DWRE4 |
| TPIC8101DWRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
TPIC8101DWRG4 |
TPIC8101DWRG4 |
| TPIC8101N |
Pb-Free (RoHS) |
CU NIPDAU |
N/A for Pkg Type |
TPIC8101N |
TPIC8101N |
| TPIC8101NE4 |
Pb-Free (RoHS) |
CU NIPDAU |
N/A for Pkg Type |
TPIC8101NE4 |
TPIC8101NE4 |
TPIC8101 应用技术支持与电子电路设计开发资源下载
- TPIC8101 数据资料 dataSheet 下载.PDF
- TI 德州仪器其它接口选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
TPIC8101 工具和软件
