TPS51116 | |
Topology | Buck,D-CAP™ Mode |
Vin(Min)(V) | 3 |
Vin(Max)(V) | 28 |
Vout(Min)(V) | 1.5 |
Vout(Max)(V) | 3 |
Regulated Outputs(#) | 1 |
Iout(Max)(A) | 10 |
Switching Frequency(Max)(kHz) | 400 |
Iq(Typ)(mA) | 0.8 |
Pin/Package | 20HTSSOP, 24VQFN |
Thermal Shutdown | Yes |
Rating | Catalog |
Duty Cycle(Max)(%) | 84 |
The TPS51116 provides a complete power supply for DDR/SSTL-2, DDR2/SSTL-18, and DDR3 memory systems. It integrates a synchronous buck controller with a 3-A sink/source tracking linear regulator and buffered low noise reference. The TPS51116 offers the lowest total solution cost in systems where space is at a premium. The TPS51116 synchronous controller runs fixed 400kHz pseudo-constant frequency PWM with an adaptive on-time control that can be configured in D-CAP Mode for ease of use and fastest transient response or in current mode to support ceramic output capacitors. The 3-A sink/source LDO maintains fast transient response only requiring 20-µF (2 × 10 µF) of ceramic output capacitance. In addition, the LDO supply input is available externally to significantly reduce the total power losses.
器件 | 状态 | 温度 (oC) | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
TPS51116PWP | ACTIVE | -40 to 85 | 1.35 | 1ku | HTSSOP (PWP) | 20 | 70 | TUBE | TPS51116 |
TPS51116PWPG4 | ACTIVE | -40 to 85 | 1.35 | 1ku | HTSSOP (PWP) | 20 | 70 | TUBE | TPS51116 |
TPS51116PWPR | ACTIVE | -40 to 85 | 1.20 | 1ku | HTSSOP (PWP) | 20 | 2000 | LARGE T&R | TPS51116 |
TPS51116PWPRG4 | ACTIVE | -40 to 85 | 1.20 | 1ku | HTSSOP (PWP) | 20 | 2000 | LARGE T&R | TPS51116 |
TPS51116RGER | ACTIVE | -40 to 85 | 1.20 | 1ku | VQFN (RGE) | 24 | 3000 | LARGE T&R | TPS 51116 |
TPS51116RGERG4 | ACTIVE | -40 to 85 | 1.20 | 1ku | VQFN (RGE) | 24 | 3000 | LARGE T&R | TPS 51116 |
TPS51116RGET | ACTIVE | -40 to 85 | 1.35 | 1ku | VQFN (RGE) | 24 | 250 | SMALL T&R | TPS 51116 |
TPS51116RGETG4 | ACTIVE | -40 to 85 | 1.35 | 1ku | VQFN (RGE) | 24 | 250 | SMALL T&R | TPS 51116 |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
TPS51116PWP | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-2-260C-1 YEAR | TPS51116PWP | |
TPS51116PWPG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-2-260C-1 YEAR | TPS51116PWPG4 | TPS51116PWPG4 |
TPS51116PWPR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-2-260C-1 YEAR | TPS51116PWPR | |
TPS51116PWPRG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-2-260C-1 YEAR | TPS51116PWPRG4 | TPS51116PWPRG4 |
TPS51116RGER | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-2-260C-1 YEAR | TPS51116RGER | |
TPS51116RGERG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-2-260C-1 YEAR | TPS51116RGERG4 | TPS51116RGERG4 |
TPS51116RGET | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-2-260C-1 YEAR | TPS51116RGET | |
TPS51116RGETG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-2-260C-1 YEAR | TPS51116RGETG4 | TPS51116RGETG4 |
名称 | 型号 | 公司 | 工具/软件类型 |
TPS51100EVM-001 评估模块 | TPS51100EVM-001 | Texas Instruments | 开发电路板/EVM |
TPS51116EVM-001 评估模块 | TPS51116EVM-001 | Texas Instruments | 开发电路板/EVM |
说明 | 型号 | 公司 |
二相同步 降压,输入电压为 5V 或 12V。 多路输出电压:1.8V 和 3.3V | PMP176 | Texas Instruments |
同步降压时,输入电压为 19.5V | PMP070 | Texas Instruments |
同步降压,输入电压为 12V | PMP217 | Texas Instruments |
热插拔、推挽、同步 降压、负反向、双路同步 降压参考设计 | PMP156 | Texas Instruments |
集成 FET、正向、双路同步的同步降压 降压参考设计 | PMP041 | Texas Instruments |