The TPS62000 device is a low-noise synchronous step-down dc-dc converter that is ideally suited for systems powered from a 1-cell Li-ion battery or from a 2- to 3-cell NiCd, NiMH, or alkaline battery. The TPS62000 operates typically down to an input voltage of 1.8 V, with a specified minimum input voltage of 2 V.
The TPS62000 is a synchronous current-mode PWM converter with integrated N- and P-channel power MOSFET switches. Synchronous rectification is used to increase efficiency and to reduce external component count. To achieve the highest efficiency over a wide load current range, the converter enters a power-saving pulse-frequency modulation (PFM) mode at light load currents. Operating frequency is typically 750 kHz, allowing the use of small inductor and capacitor values.
TPS5430-EP | |
Iout (Max) (A) | 0.3 |
Vin (Min) (V) | 2 |
Vin (Max) (V) | 5.5 |
Vout (Min) (V) | 0.9 |
Vout (Max) (V) | 5 |
Iq (Typ) (mA) | 0.05 |
Switching Frequency (Typ) (kHz) | 1000 |
Switch Current Limit (Typ) (A) | 1.6 |
Topology | Buck |
Operating Temperature Range (C) | -55 to 210 |
Pin/Package | 10CFP |
Rating | High Temp |
Duty Cycle (Max) (%) | 100 |
Regulated Outputs (#) | 1 |
器件 | 状态 | 温度 (oC) | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
TPS62000SHKK | ACTIVE | -55 to 210 | 47.50 | 100u | CFP (HKK) | 10 | 1 | TUBE | |
TPS62000SKGD1 | ACTIVE | -55 to 210 | 47.50 | 100u | XCEPT (KGD) | 0 | 100 |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
TPS62000SHKK | TBD | AU | N/A for Pkg Type | TPS62000SHKK | TPS62000SHKK |
TPS62000SKGD1 | TBD | Call TI | N/A for Pkg Type | TPS62000SKGD1 | TPS62000SKGD1 |
培训内容 | 型号 | 软件/工具类型 |
最常用开关模式电源的功率级设计器 | POWERSTAGE-DESIGNER | 分析软件 |