TPS59610 用于 IMVP6+ CPU 和图形 Vcore 嵌入式计算的单相 D-CAP+™ 同步降压控制器
|
TPS59610 |
TPS59621 |
| Topology |
Buck,Single Phase,IMVP6+ |
Buck,Dual Phase,IMVP6.5 |
| Vin(Min)(V) |
3 |
3 |
| Vin(Max)(V) |
28 |
28 |
| Vout(Min)(V) |
0.3 |
0.3 |
| Vout(Max)(V) |
1.5 |
1.5 |
| Regulated Outputs(#) |
1 |
1 |
| Switching Frequency(Max)(kHz) |
500 |
500 |
| Pin/Package |
32QFN |
40VQFN |
| Thermal Shutdown |
Yes |
Yes |
| Rating |
Catalog |
Catalog |
| Duty Cycle(Max)(%) |
50 |
50 |
TPS59610 描述
The TPS59610 is a fully Intel-compliant single-phase synchronous buck controller with integrated gate drivers designed for use in low-power CPUs and Intel integrated Graphics solutions for IMVP-6+ generation notebook systems. Advanced control features such as D-CAP+ architecture and OSR overshoot reduction provide fast transient response, lowest output capacitance and high efficiency. The TPS59610 DAC provides the 5-bit graphics render VID. The TPS59610 provides the full compliment of IMVP6+ I/O including VR_TT, and PMON. Adjustable control of VCORE slew rate and voltage positioning round out the IMVP6+ features. In addition, the TPS59610 includes two high-current FET gate drivers to drive external N-channel FETs with low switching loss
TPS59610 特性
- Minimum External Parts Count
- Full IMVP6+ Compliance, Including VR_TT and Output Power Monitor
- Dual Mode DAC supports 5-Bit and 7-Bit VIDs
- 0.3-V to 1.5-V Output Range
- ±8 mV VCORE Accuracy Over Line/Load/Temp
- Optimized Efficiency at Light and Heavy Loads
- Patented Output Overshoot Reduction (OSR) Reduces Output Capacitance
- Accurate, Adjustable Voltage Positioning
- Selectable 200/300/400/500 kHz Frequency
- 3-V to 28-V Conversion Voltage Range
- Fast FET Driver w/Integrated Boost Diode
- Integrated OVP Can Be Disabled
- Available in 5 × 5, 32-Pin QFN PowerPAD Package
- APPLICATIONS
- IMVP6+ Single-Phase CPU and GPU VCORE Embedded Computing Applications
TPS59610 芯片订购指南
| 器件 |
状态 |
温度 (oC) |
价格（美元） |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| TPS59610RHBR |
ACTIVE |
-40 to 105 |
1.75 | 1ku |
QFN (RHB) | 32 |
3000 | LARGE T&R |
TPS
59610 |
| TPS59610RHBT |
ACTIVE |
-40 to 105 |
1.95 | 1ku |
QFN (RHB) | 32 |
250 | SMALL T&R |
TPS
59610 |
TPS59610 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| TPS59610RHBR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-2-260C-1 YEAR |
|
TPS59610RHBR |
| TPS59610RHBT |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-2-260C-1 YEAR |
|
TPS59610RHBT |
TPS59610 应用技术支持与电子电路设计开发资源下载
- TPS59610 数据资料 dataSheet 下载.PDF
- TI 德州仪器非隔离式开关 DC/DC 调节器选型与价格参考 . xls
- Dual MOSFET Driver
(PDF 498 KB)
- 全面认识开关型电源中的BUCK-BOOST功率级 (Rev. A)
(PDF 2206 KB)
- Understanding Boost Power Stages In Switchmode Power Supplies
(PDF 149 KB)
- Understanding Buck Power Stages In Switchmode Power Supplies
(PDF 173 KB)
- 标准线性产品交叉参考 (Rev. D)
(PDF 1058 KB)
- 模数规格和性能特性术语表 (Rev. A) (PDF 1993 KB)
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 高速数据转换 (PDF 1967 KB)
TPS59610 相关工具
| 名称 |
型号 |
公司 |
工具/软件类型 |
| TPS59610EVM 高效双路同步降压控制器评估模块 |
TPS59610EVM |
Texas Instruments |
开发电路板/EVM |
TPS59610 参考设计
| 说明 |
型号 |
公司 |
| 二相同步 降压，输入电压为 5V 或 12V。 多路输出电压：1.8V 和 3.3V |
PMP176 |
Texas Instruments |
| 同步降压时，输入电压为 19.5V |
PMP070 |
Texas Instruments |
| 同步降压，输入电压为 12V |
PMP217 |
Texas Instruments |
| 热插拔、推挽、同步 降压、负反向、双路同步 降压参考设计 |
PMP156 |
Texas Instruments |
| 集成 FET、正向、双路同步的同步降压 降压参考设计 |
PMP041 |
Texas Instruments |
