TSB12LV01B-EP 用于电信的高性能 1394 3.3V 链路层,嵌入式工业应用,32 位置 I/F,2kb FIFO

The TSB12LV01B is an IEEE 1394-1995 standard (from now on referred to only as 1394) high-speed serial-bus link-layer controller that allows for easy integration into an I/O subsystem. The TSB12LV01B provides a high-performance IEEE 1394-1995 interface with the capability of transferring data between the 32-bit host bus, the 1394 PHY-link interface, and external devices connected to the local bus interface. The 1394 PHY-link interface provides the connection to the 1394 physical (PHY) layer device and is supported by the link-layer controller (LLC). The LLC provides the control for transmitting and receiving 1394 packet data between the FIFO and PHY-link interface at rates of 100 Mbits/s, 200 Mbits/s, and 400 Mbits/s

TSB12LV01B-EP
Supply Voltage(s)(V) 3.3  
Speed(Max)(Mbps) 400  
FIFO(kb) 2  
Pin/Package 100TQFP  
Operating Temperature Range(°C) -40 to 85  
Rating HiRel Enhanced Product
TSB12LV01B-EP 特性
TSB12LV01B-EP 芯片订购指南
器件 状态 温度 价格 封装 | 引脚 封装数量 | 封装载体 丝印标记
TSB12LV01BIPZTEP ACTIVE -40 to 85 17.03 | 100u TQFP (PZT) | 100 90 | JEDEC TRAY (10+1)  
V62/03611-01XE ACTIVE -40 to 85 17.03 | 100u TQFP (PZT) | 100 90 | JEDEC TRAY (10+1)  
TSB12LV01B-EP 质量与无铅数据
器件 环保计划* 铅/焊球涂层 MSL 等级/回流焊峰 环保信息与无铅 (Pb-free) DPPM / MTBF / FIT 率
TSB12LV01BIPZTEP Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR TSB12LV01BIPZTEP TSB12LV01BIPZTEP
V62/03611-01XE Green (RoHS & no Sb/Br)  CU NIPDAU  Level-3-260C-168 HR V62/03611-01XE V62/03611-01XE
TSB12LV01B-EP 应用技术支持与电子电路设计开发资源下载
  1. TSB12LV01B-EP 数据资料 dataSheet 下载.PDF
  2. TI 德州仪器1394 链路层控制器产品选型与价格 . xls
  3. Analog Signal Chain Guide (8.62 MB)
  4. Industrial Interface IC Solutions (101 KB)