TSB81BA3E IEEE P1394b 三端口电缆收发器/仲裁器
The TSB81BA3E provides the digital and analog transceiver functions needed to implement a three-port node in a cable-based IEEE 1394 network. Each cable port incorporates two differential line transceivers. The transceivers include circuitry to monitor the line conditions as needed for determining connection status, for initialization and arbitration, and for packet reception and transmission. The TSB81BA3E is designed to interface with a link-layer controller (LLC), such as the TSB82AA2, TSB12LV21, TSB12LV26, TSB12LV32, TSB42AA4, TSB42AB4, TSB12LV01B, or TSB12LV01C. It also may be connected cable port to cable port to an integrated 1394 Link + PHY layer such as the TSB43AB2.
The TSB81BA3E can be powered by a single 3
|
TSB81BA3E |
| Supply Voltage(s)(V) |
1.8,3.3 |
| Speed(Max)(Mbps) |
800 |
| Ports |
3 |
| Pin/Package |
168NFBGA, 80HTQFP |
| Operating Temperature Range(°C) |
-40 to 85,0 to 70 |
| Rating |
Catalog |
TSB81BA3E 特性
- Fully Supports Provisions of IEEE P1394b Revision 1.33+ at 1-Gigabit Signaling Rates
- Fully Supports Provisions of IEEE 1394a-2000 and 1394-1995 Standard for High Performance Serial Bus
- Fully Interoperable With Firewire, i.LINK, and SB1394™, Implementation of IEEE Std 1394
- Provides Three Fully Backward Compatible, (1394a-2000 Fully Compliant) Bilingual P1394b Cable Ports at up to 800 Megabits per Second (Mbits/s)
- Provides Three 1394a-2000 Fully Compliant Cable Ports at 100/200/400 Mbits/s
- Full 1394a-2000 Support Includes:
- Connection Debounce
- Arbitrated Short Reset
- Multispeed Concatenation
- Arbitration Acceleration
- Fly-By Concatenation
- Port Disable/Suspend/Resume
- Extended Resume Signaling for Compatibility With Legacy DV Devices
- Power-Down Features to Conserve Energy in Battery Powered Applications
- Low-Power Sleep Mode
- Fully Compliant With Open Host Controller Interface (HCI) Requirements
- Cable Power Presence Monitoring
- Cable Ports Monitor Line Conditions for Active Connection to Remote Node
- Register Bits Give Software Control of Contender Bit, Power Class Bits, Link Active Control Bit, and 1394a-2000 Features
- Data Interface to Link-Layer Controller Pin Selectable From 1394a-2000 Mode (2/4/8 Parallel Bits at 49.152 MHz) or 1394b Mode
(8 Parallel Bits at 98.304 MHz)
TSB81BA3E 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| TSB81BA3EIPFP |
ACTIVE |
-40 to 85 |
5.95 | 1ku |
HTQFP (PFP) | 80 |
96 | JEDEC TRAY (10+1) |
|
| TSB81BA3EIZAJ |
ACTIVE |
-40 to 85 |
5.95 | 1ku |
NFBGA (ZAJ) | 168 |
260 | JEDEC TRAY (10+1) |
|
| TSB81BA3EPFP |
ACTIVE |
0 to 70 |
5.40 | 1ku |
HTQFP (PFP) | 80 |
96 | JEDEC TRAY (10+1) |
|
| TSB81BA3EZAJ |
ACTIVE |
0 to 70 |
5.40 | 1ku |
NFBGA (ZAJ) | 168 |
260 | JEDEC TRAY (10+1) |
|
TSB81BA3E 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| TSB81BA3EIPFP |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TSB81BA3EIPFP |
TSB81BA3EIPFP |
| TSB81BA3EIZAJ |
Green (RoHS & no Sb/Br) |
SNAGCU |
Level-3-260C-168 HR |
TSB81BA3EIZAJ |
TSB81BA3EIZAJ |
| TSB81BA3EPFP |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TSB81BA3EPFP |
TSB81BA3EPFP |
| TSB81BA3EZAJ |
Green (RoHS & no Sb/Br) |
SNAGCU |
Level-3-260C-168 HR |
TSB81BA3EZAJ |
TSB81BA3EZAJ |
TSB81BA3E 应用技术支持与电子电路设计开发资源下载
- TSB81BA3E 数据资料 dataSheet 下载.PDF
- TI 德州仪器1394 物理层控制器 产品选型与价格 . xls
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
