UC2714M 辅助开关 FET 驱动器

These two families of high speed drivers are designed to provide drive waveforms for complementary switches. Complementary switch configurations are commonly used in synchronous rectification circuits and active clamp/reset circuits, which can provide zero voltage switching. In order to facilitate the soft switching transitions, independently programmable delays between the two output waveforms are provided on these drivers. The delay pins also have true zero voltage sensing capability which allows immediate activation of the corresponding switch when zero voltage is applied. These devices require a PWM-type input to operate and can be interfaced with commonly available PWM controllers.

In the UC1714 series, the AUX output is inverted to allow driving a p-channel MOSFET

UC2714M
No. of Outputs 2    
Driver Configuration Inverting, Non-Inverting
VCC (Min) (V) 7    
VCC (Max) (V) 20    
Peak Output Current (A) 1    
Rise Time (ns) 30    
Fall Time (ns) 25    
Prop Delay (ns) 50    
Input Threshold TTL    
Pin/Package 8SOIC    
Rating Military    
Operating Temperature Range (C) -40 to 85
UC2714M 特性
UC2714M 芯片订购指南
器件 状态 温度 (oC) 价格(美元) 封装 | 引脚 封装数量 | 封装载体 丝印标记
UC2714DTR ACTIVE -40 to 85 1.05 | 1ku SOIC (D) | 8 2500 | LARGE T&R  
UC2714DTRG4 ACTIVE -40 to 85 1.05 | 1ku SOIC (D) | 8 2500 | LARGE T&R  
UC2714M 质量与无铅数据
器件 环保计划* 铅/焊球涂层 MSL 等级/回流焊峰 环保信息与无铅 (Pb-free) DPPM / MTBF / FIT 率
UC2714DTR Green (RoHS & no Sb/Br)   CU NIPDAU   Level-2-250C-1 YEAR UC2714DTR UC2714DTR
UC2714DTRG4 Green (RoHS & no Sb/Br)   CU NIPDAU   Level-2-250C-1 YEAR UC2714DTRG4 UC2714DTRG4
UC2714M 工具与软件
培训内容 型号 软件/工具类型
最常用开关模式电源的功率级设计器 POWERSTAGE-DESIGNER 分析软件
UC2714M 应用技术支持与电子电路设计开发资源下载
  1. UC2714M数据资料 dataSheet 下载.PDF
  2. TI 德州仪器电源管理选型与价格参考 . xls
  3. U-118 New Driver ICs Optimize High-Speed Power MOSFET Switching Characteristics
  4. U-137 Practical Considerations in High Performance MOSFET, IGBT and MCT Gate