UCC2806M 低功耗、双路输出、电流模式 PWM 控制器

The UCC3806 family of BiCMOS PWM controllers offers exceptionally improved performance with a familiar architecture. With the same block diagram and pinout of the popular UC3846 series, the UCC3806 line features increased switching frequency capability while greatly reducing the bias current used within the device. With a typical startup current of 50µA and a well defined voltage threshold for turn-on, these devices are favored for applications ranging from off-line power supplies to battery operated portable equipment. Dual high current, MOSFET driving outputs and a fast current sense loop further enhance device versatility.

All the benefits of current mode control including simpler loop closing, voltage feed-forward, parallelability with current sharing, pulse-by-pulse current limiting, and push-pull symmetry correction are readily achievable with the UCC3806 series.

	UCC2806M
Topology	Boost, Flyback, Forward
Control Method	Current
Duty Cycle (Max) (%)	50
Frequency (Max) (kHz)	1000
UVLO Thresholds On/Off (V)	7.5/6.75
Pin/Package	16CDIP
Vin (Min) (V)	6.75
Vin (Max) (V)	15
Regulated Outputs (#)	2
Operating Temperature Range (C)	-40 to 85
Rating	Military

UCC2806M 特性

BiCMOS Version of UC3846 Families
1.4-mA Maximum Operating Current
100-µA Maximum Startup Current
±0.5-A Peak Output Current
125-ns Circuit Delay
Easier Parallelability
Improved Benefits of Current Mode Control

UCC2806M 芯片订购指南

器件	状态	温度 (oC)	价格（美元）	封装 \| 引脚	封装数量 \| 封装载体	丝印标记
UCC2806J	ACTIVE	-40 to 85	11.52 \| 100u	CDIP (J) \| 16	1 \| TUBE

UCC2806M 质量与无铅数据

器件	环保计划*	铅/焊球涂层	MSL 等级/回流焊峰	环保信息与无铅 (Pb-free)	DPPM / MTBF / FIT 率
UCC2806J	TBD	A42	N/A for Pkg Type	UCC2806J	UCC2806J

UCC2806M 工具与软件

培训内容	型号	软件/工具类型
最常用开关模式电源的功率级设计器	POWERSTAGE-DESIGNER	分析软件