UCC5628 14 线路 2.7-5V 多模端接器，用于 SCSI 至 Ultra320 SCSI
The UCC5628 Multimode SCSI terminator provides a smooth transition into the low-voltage differential SCSI parallel interface (SPI-2, SPI-3 and SPI-4). It automatically senses the bus, via DIFFB, and switches the termination to either single ended (SE) or low-voltage differential (LVD) SCSI, dependent on which type of devices are connected to the bus. The UCC5628 can not be used on a high voltage differential (HVD), EIA485, differential SCSI bus. If the UCC5628 detects a HVD SCSI device, it switches to a high-impedance state.
The Multimode terminator contains all functions required to terminate and auto detect and switch modes for SPI-2, SPI-3 and SPI-4 bus architectures. Single ended, differential impedances and currents are trimmed for maximum effectiveness
|
UCC5628 |
| Number of Lines |
14 |
| Driver Types Supported |
LVD, SE |
| TERMPWR Voltage(Min)(V) |
2.7 |
| TERMPWR Voltage(Max)(V) |
5.25 |
| Disconnect Active State |
High |
| Process |
Bi-CMOS |
| Channel Capacitance(pF) |
3 |
| Resistor Tolerance(ppm) |
500 |
| Typical Sink Current(mA) |
100 |
| Current Tolerance(%) |
4 |
| Single-Ended Termination Impedance(ohms) |
110 |
| Single-Ended Tolerance(%) |
7 |
| LVD Termination Impedance(ohms) |
105 |
| LVD Tolerance(%) |
5 |
| Common mode Impedance(ohms) |
150 |
| Operating Temperature Range(C) |
0 to 70 |
| Pin/Package |
48LQFP |
UCC5628 特性
- Auto Selection Single Ended (SE) or Low Voltage Differential (LVD) Termination
- Meets SCSI-1, SCSI-2, SCSI-3, SPI, Ultra (Fast-20), Ultra2 (SPI-2 LVD), Ultra3, Ultra160 (SPI-3) and Ultra320 (SPI-4) Standards
- 2.7V to 5.25V Operation
- Differential Failsafe Bias
- Thermal packaging for low junction temperature and better MTBF
UCC5628 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| UCC5628FQP |
ACTIVE |
0 to 70 |
2.95 | 1ku |
LQFP (PT) | 48 |
250 | JEDEC TRAY (10+1) |
|
| UCC5628FQPG4 |
ACTIVE |
0 to 70 |
2.95 | 1ku |
LQFP (PT) | 48 |
250 | JEDEC TRAY (10+1) |
|
| UCC5628FQPTR |
ACTIVE |
0 to 70 |
2.60 | 1ku |
LQFP (PT) | 48 |
1000 | LARGE T&R |
|
| UCC5628FQPTRG4 |
ACTIVE |
0 to 70 |
2.60 | 1ku |
LQFP (PT) | 48 |
1000 | LARGE T&R |
|
UCC5628 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| UCC5628FQP |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
UCC5628FQP |
UCC5628FQP |
| UCC5628FQPG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
UCC5628FQPG4 |
UCC5628FQPG4 |
| UCC5628FQPTR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
UCC5628FQPTR |
UCC5628FQPTR |
| UCC5628FQPTRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
UCC5628FQPTRG4 |
UCC5628FQPTRG4 |
UCC5628 应用技术支持与电子电路设计开发资源下载
- UCC5628 数据资料 dataSheet 下载.PDF
- TI 德州仪器SCSI 终端和收发器选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
UCC5628 工具和软件
