UCC5672 9 线路 2.7-5V 多模式终端，用于 SCSI 至 Ultra320，具有 SPI-3 模式更改延迟
The UCC5672 Multi-Mode Low Voltage Differential and Single Ended Terminator is both a single ended terminator and a low voltage differential terminator for the transition to the next generation SCSI Parallel Interface (SPI-3). The low voltage differential is a requirement for the higher speeds at a reasonable cost and is the only way to have adequate skew budgets.
The automatic mode select/change feature switches the terminator between Single Ended or LVD SCSI Termination, depending on the bus mode. If the bus is in High Voltage Differential Mode, the terminator lines transition into a High Impedance state.
The UCC5672 is SPI-4, SPI-3, SPI-2, and SCSI-2 compliant. This device is offered in a 28 pin TSSOP package to minimize the footprint
|
UCC5672 |
| Number of Lines |
9 |
| Driver Types Supported |
LVD, SE |
| TERMPWR Voltage(Min)(V) |
2.7 |
| TERMPWR Voltage(Max)(V) |
5.25 |
| Disconnect Active State |
High |
| Process |
Bi-CMOS |
| Channel Capacitance(pF) |
3 |
| Resistor Tolerance(ppm) |
500 |
| Typical Sink Current(mA) |
100 |
| Current Tolerance(%) |
4 |
| Single-Ended Termination Impedance(ohms) |
110 |
| Single-Ended Tolerance(%) |
7 |
| LVD Termination Impedance(ohms) |
105 |
| LVD Tolerance(%) |
5 |
| Common mode Impedance(ohms) |
150 |
| Operating Temperature Range(C) |
0 to 70 |
| Pin/Package |
28TSSOP, 36SSOP |
UCC5672 特性
- Auto Selection Multi-Mode Single Ended or Low Voltage Differential Termination
- 2.7V to 5.25V Operation
- Differential Failsafe Bias
- Built-in SPI-3 Mode Change Filter/Delay
- Meets SCSI-1, SCSI-2, Ultra2 (SPI-2 LVD), Ultra3/Ultra160 (SPI-3) and Ultra320 (SPI-4) Standards
- Supports Active Negation
- 3pF Channel Capacitance
UCC5672 芯片订购指南
UCC5672 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| UCC5672MWP |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
UCC5672MWP |
UCC5672MWP |
| UCC5672MWPG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
UCC5672MWPG4 |
UCC5672MWPG4 |
| UCC5672PWP |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
UCC5672PWP |
UCC5672PWP |
| UCC5672PWPG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
UCC5672PWPG4 |
UCC5672PWPG4 |
| UCC5672PWPTR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
UCC5672PWPTR |
UCC5672PWPTR |
| UCC5672PWPTRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
UCC5672PWPTRG4 |
UCC5672PWPTRG4 |
UCC5672 应用技术支持与电子电路设计开发资源下载
- UCC5672 数据资料 dataSheet 下载.PDF
- TI 德州仪器SCSI 终端和收发器选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
UCC5672 工具和软件
