UCC5696 用于 SPI-5 以及后代产品的仅 27 线路 LVD SCSI 终端
The UCC5696 is a 27-line LVD only SCSI programmable terminator. The nominal settings on power up are compliant to SPI–2 through SPI–4. The programmable settings are used for SPI–5. The UCC5696 uses the I2C to program the differential impedance and the differential bias current. The differential impedance is programmed in 5-
using 4 bits (16 steps). The differential bias current is programmed in 50 µA from 0.7 mA to 1.45 mA using 4 bits (16 steps). The UCC5696 has the SPI–3 mode change delay, the typical value is 200 ms.
The UCC5696 can not be used for single-ended or HVD SCSI, the termination lines will open when it detects either single-ended or HVD devices on the SCSI bus
|
UCC5696 |
| Number of Lines |
27 |
| Driver Types Supported |
LVD |
| TERMPWR Voltage(Min)(V) |
2.7 |
| TERMPWR Voltage(Max)(V) |
5.25 |
| Disconnect Active State |
High |
| Process |
Bi-CMOS |
| Channel Capacitance(pF) |
3 |
| Resistor Tolerance(ppm) |
500 |
| Typical Sink Current(mA) |
200 |
| LVD Termination Impedance(ohms) |
105 |
| LVD Tolerance(%) |
5 |
| Common mode Impedance(ohms) |
170 |
| Operating Temperature Range(C) |
0 to 70 |
| Pin/Package |
80LQFP |
UCC5696 特性
- Meets Ultra2 (SPI-2 LVD SCSI), Ultra3, Ultra 160 (SPI-3), Ultra320 (SPI-4), and Ultra640 (SPI-5) Standards
- 2.7-V to 5.25-V Termpwr Operation
- Differential Fail-Safe Bias
- I2C Bus Adjustable Impedance and Differential Bias Current
- 80-Pin Low Profile Quad Flat Pack Package (QFP)
UCC5696 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| UCC5696PNR |
ACTIVE |
0 to 70 |
7.00 | 1ku |
LQFP (PN) | 80 |
1000 | LARGE T&R |
|
| UCC5696PNRG4 |
ACTIVE |
0 to 70 |
7.00 | 1ku |
LQFP (PN) | 80 |
1000 | LARGE T&R |
|
UCC5696 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| UCC5696PNR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
UCC5696PNR |
UCC5696PNR |
| UCC5696PNRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
UCC5696PNRG4 |
UCC5696PNRG4 |
UCC5696 应用技术支持与电子电路设计开发资源下载
- UCC5696 数据资料 dataSheet 下载.PDF
- TI 德州仪器SCSI 终端和收发器选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
UCC5696 工具和软件
