AMS2026 is a dual power distribution switch intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. The high-side switch is a 95m N-channel MOSFET. The switch is controlled by a logic enable input compatible with 3V and 5V logic and is available in active-high or active-low enable. The internal charge pump, designed to control the power switch rise and fall time to minimize current surges during switching, also provides the gate drive. Requiring no external components the charge pump allows operation from supplies as low as 4.0V. When an overload or a short circuit is encountered the AMS2026 limits the output current to a safe level by switching into a constant-current mode and the over current logic output error flag is set to a low. Continuous heavy overloads and short circuits will increase the power dissipation in the switch; this will cause the junction temperature to rise. The thermal protection circuit shuts the power switch off to prevent damage. Once the device has cooled sufficiently, it will turn on automatic. An under voltage lock-out is provided to insure that the power switch is in the Off state at start-up.
The AMS2026 is used in USB power management, hot plug-in power supplies and battery charger circuits.
8 LEAD SOIC | 8 LEAD PDIP | Operating Temp(°C) |
AMS2026S | AMS2026P | -40°C to 85°C |
AMS2026 数据手册DataSheet 下载 . pdf
AMS2027 is a single power distribution switch that feature short circuit protection, logic overcorrect output error flag, logic under voltage output error flag, logic overheat output error flag and short circuit protection. . The high-side switch is a 95m N-channel MOSFET. The switch is controlled by a logic enable input compatible with 3V and 5V logic and is available in active-high or active-low enable.
Typical applications include USB power management, hot plug-in power supplies and battery charger circuits.
8 LEAD SOIC | 8 LEAD PDIP | Operating Temp(°C) |
AMS2027S | AMS2027P | -40°C to 85°C |
AMS2027 数据手册DataSheet 下载 . pdf