功耗最低的8位、4/8通道ADC,内置基准
The MAX1110/MAX1111 low-power, 8-bit, 8-channel analog-to-digital converters (ADCs) feature an internal track/hold, voltage reference, clock, and serial interface. They operate from a single 2.7V to 5.5V supply and consume only 85µA while sampling at rates up to 50ksps. The MAX1110's 8 analog inputs and the MAX1111's 4 analog inputs are software-configurable, allowing unipolar/bipolar and single-ended/differential operation. Successive-approximation conversions are performed using either the internal clock or an external serial-interface clock. The full-scale analog input range is determined by the 2.048V internal reference, or by an externally applied reference ranging from 1V to VDD. The 4-wire serial interface is compatible with the SPI™, QSPI™, and MICROWIRE™ serial-interface standards. A serial-strobe output provides the end-of-conversion signal for interrupt-driven processors. The MAX1110/MAX1111 have a software-programmable, 2µA automatic power-down mode to minimize power consumption. Using power-down, the supply current is reduced to 6µA at 1ksps, and only 52µA at 10ksps. Power-down can also be controlled using the active-low SHDN input pin. Accessing the serial interface automatically powers up the device. The MAX1110 is available in a 20-pin SSOP package. The MAX1111 is available in a small 16-pin QSOP package.
语言 | 下载文件 | 备注 |
---|---|---|
英文 | MAX1110-MAX1111.pdf | Rev 4; 05/2011 |
Part Number | Resolution (bits) | Input Chan. | Conv. Rate (ksps) | ADC Architecture | Data Bus | Diff/S.E. Input | Internal VREF (V) | External VREF (V) | External VREF (V) | Unipolar VIN (V) | Bipolar VIN (±V) | SNR (dB) | THD (dB) | INL (±LSB) | Package/Pins | Budgetary Price |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ADC | max | nominal | min | max | max | max | See Notes | |||||||||
MAX1110 | 8 | 8 | 50 | SAR | SPI | Both | 2.048 | 1 | 5.5 | 2.048 | 1.024 | 49 | -70 | 0.2 |
| $2.07 @1k |
MAX1111 | 4 |
| $2.43 @1k | |||||||||||||
型号 | 状况 | 推荐替代产品 | 封装 | 温度 | RoHS/无铅 |
---|---|---|---|---|---|
MAX1110C/D | 停止供货 | DICE; | 0°C至+70°C | 参考数据资料 | |
MAX1110CAP | 停止供货 | MAX1110CAP+ | SSOP,;20引脚;57.9mm² | 0°C至+70°C | RoHS/无铅:否 |
MAX1110CAP+ | 生产中 | SSOP,;20引脚;57.9mm² | 0°C至+70°C | RoHS/无铅:无铅 | |
MAX1110CAP+T | 生产中 | SSOP,;20引脚;57.9mm² | 0°C至+70°C | RoHS/无铅:无铅 | |
MAX1110CAP-T | 停止供货 | MAX1110CAP+T | SSOP;20引脚 | 0°C至+70°C | 参考数据资料 |
MAX1110CPP | 停止供货 | MAX1110CAP+ | PDIP(N),;20引脚;217.1mm² | 0°C至+70°C | RoHS/无铅:否 |
MAX1110CPP+ | 停止供货 | MAX1110CAP+ | PDIP(N),;20引脚;217.1mm² | 0°C至+70°C | RoHS/无铅:无铅 |
MAX1110EAP | 停止供货 | MAX1110EAP+ | SSOP,;20引脚;57.9mm² | -40°C至+85°C | RoHS/无铅:否 |
MAX1110EAP+ | 生产中 | SSOP,;20引脚;57.9mm² | -40°C至+85°C | RoHS/无铅:无铅 | |
MAX1110EAP+T | 生产中 | SSOP,;20引脚;57.9mm² | -40°C至+85°C | RoHS/无铅:无铅 | |
型号 | 状况 | 推荐替代产品 | 封装:类型 引脚 占位面积封装图 编码/变更 * | 温度 | RoHS/无铅? |
MAX1110EAP-T | 停止供货 | MAX1110EAP+T | SSOP,;20引脚;57.9mm² | -40°C至+85°C | RoHS/无铅:否 |
MAX1110EPP | 停止供货 | MAX1110EAP+ | PDIP(N),;20引脚;217.1mm² | -40°C至+85°C | RoHS/无铅:否 |
MAX1110EPP+ | 停止供货 | MAX1110EAP+ | PDIP(N),;20引脚;217.1mm² | -40°C至+85°C | RoHS/无铅:无铅 |
MAX1110EVL11-DIP | 停止供货 | 参考数据资料 | |||
MAX1110MJP | 停止供货 | CDIP(N),;20引脚;218.9mm² | -55°C至+125°C | RoHS/无铅:否 |