Lowest-Power 8-Bit 4/8-Channel ADCs Have Internal Reference
The MAX1110/MAX1111 low-power, 8-bit, 8-channel analog-to-digital converters (ADCs) feature an internal track/hold, voltage reference, clock, and serial interface. They operate from a single 2.7V to 5.5V supply and consume only 85µA while sampling at rates up to 50ksps. The MAX1110's 8 analog inputs and the MAX1111's 4 analog inputs are software-configurable, allowing unipolar/bipolar and single-ended/differential operation. Successive-approximation conversions are performed using either the internal clock or an external serial-interface clock. The full-scale analog input range is determined by the 2.048V internal reference, or by an externally applied reference ranging from 1V to VDD. The 4-wire serial interface is compatible with the SPI™, QSPI™, and MICROWIRE™ serial-interface standards. A serial-strobe output provides the end-of-conversion signal for interrupt-driven processors. The MAX1110/MAX1111 have a software-programmable, 2µA automatic power-down mode to minimize power consumption. Using power-down, the supply current is reduced to 6µA at 1ksps, and only 52µA at 10ksps. Power-down can also be controlled using the active-low SHDN input pin. Accessing the serial interface automatically powers up the device. The MAX1110 is available in a 20-pin SSOP package. The MAX1111 is available in a small 16-pin QSOP package.
title | Download file |
---|---|
MAX1110-MAX1111 Data Sheet | MAX1110-MAX1111.pdf |
Part Number | Resolution (bits) | Input Chan. | Conv. Rate (ksps) | ADC Architecture | Data Bus | Diff/S.E. Input | Internal VREF (V) | External VREF (V) | External VREF (V) | Unipolar VIN (V) | Bipolar VIN (±V) | SNR (dB) | THD (dB) | INL (±LSB) | Package/Pins | Budgetary Price |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ADC | max | nominal | min | max | max | max | See Notes | |||||||||
MAX1110 | 8 | 8 | 50 | SAR | SPI | Both | 2.048 | 1 | 5.5 | 2.048 | 1.024 | 49 | -70 | 0.2 | CDIP(N)/20 PDIP(N)/20 SSOP/20 | $2.07 @1k |
MAX1111 | 4 | CDIP(N)/16 PDIP(N)/16 QSOP/16 | $2.43 @1k | |||||||||||||
Part Number | Status | Recommended Replacement | Package | Temp | RoHS |
---|---|---|---|---|---|
MAX1110C/D | No Longer Available | DICE; | 0°C to +70°C | See data sheet | |
MAX1110CAP | No Longer Available | MAX1110CAP+ | SSOP,;20 pin;57.9 mm² | 0°C to +70°C | No |
MAX1110CAP+ | Active | SSOP,;20 pin;57.9 mm² | 0°C to +70°C | Lead Free | |
MAX1110CAP+T | Active | SSOP,;20 pin;57.9 mm² | 0°C to +70°C | Lead Free | |
MAX1110CAP-T | No Longer Available | MAX1110CAP+T | SSOP;20 pin | 0°C to +70°C | See data sheet |
MAX1110CPP | No Longer Available | MAX1110CAP+ | PDIP(N),;20 pin;217.1 mm² | 0°C to +70°C | No |
MAX1110CPP+ | No Longer Available | MAX1110CAP+ | PDIP(N),;20 pin;217.1 mm² | 0°C to +70°C | Lead Free |
MAX1110EAP | No Longer Available | MAX1110EAP+ | SSOP,;20 pin;57.9 mm² | -40°C to +85°C | No |
MAX1110EAP+ | Active | SSOP,;20 pin;57.9 mm² | -40°C to +85°C | Lead Free | |
MAX1110EAP+T | Active | SSOP,;20 pin;57.9 mm² | -40°C to +85°C | Lead Free | |
Part Number | Status | Recommended Replacement | Package | Temp | RoHS |
MAX1110EAP-T | No Longer Available | MAX1110EAP+T | SSOP,;20 pin;57.9 mm² | -40°C to +85°C | No |
MAX1110EPP | No Longer Available | MAX1110EAP+ | PDIP(N),;20 pin;217.1 mm² | -40°C to +85°C | No |
MAX1110EPP+ | No Longer Available | MAX1110EAP+ | PDIP(N),;20 pin;217.1 mm² | -40°C to +85°C | Lead Free |
MAX1110EVL11-DIP | No Longer Available | See data sheet | |||
MAX1110MJP | No Longer Available | CDIP(N),;20 pin;218.9 mm² | -55°C to +125°C | No |