• 简体中文
• English

MAX1248：+2.7V至+5.25V、低功耗、4通道、串行、10位ADC，QSOP-16封装

The MAX1248/MAX1249 10-bit data-acquisition systems combine a 4-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption. They operate from a single +2.7V to +5.25V supply, and their analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation. The 4-wire serial interface connects directly to SPI™/ QSPI™ and MICROWIRE™ devices without external logic. A serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX1248/MAX1249 use either the internal clock or an external serial-interface clock to perform successive-approximation analog-to-digital conversions. The MAX1248 has an internal 2.5V reference, while the MAX1249 requires an external reference. Both parts have a reference-buffer amplifier with a ±1.5% voltage adjustment range. These devices provide a hard-wired active-low SHDN pin and a software-selectable power-down, and can be programmed to automatically shut down at the end of a conversion. Accessing the serial interface automatically powers up the MAX1248/MAX1249, and the quick turn-on time allows them to be shut down between all conversions. This technique can cut supply current to under 60µA at reduced sampling rates. The MAX1248/MAX1249 are available in a 16-pin DIP and a very small QSOP that occupies the same board area as an 8-pin SO. For 8-channel versions of these devices, see the MAX148/MAX149 datasheet.

关键特性 4-Channel Single-Ended or 2-Channel Differential Inputs Single +2.7V to +5.25V Operation Internal 2.5V Reference (MAX1248) Low Power: 1.2mA (133ksps, +3V supply) 54µA (1ksps, +3V supply) 1µA (power-down mode) SPI/QSPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface Software-Configurable Unipolar or Bipolar Inputs 16-Pin QSOP Package (same area as 8-pin SO)

MAX1248、MAX1249：典型工作电路 应用 电池供电应用 数据采集 医疗仪器 笔输入量化器 便携式数据记录 系统监控

数据手册DataSheet

关键参数

技术资料

• Circuit Enables PC-Based Voltage Measurements

质量和环境数据

• MAX1248.pdf

相关产品

• MAX11619：10位、300ksps ADC，带有FIFO和内部基准
• MAX1046：10位、多通道ADC/DAC，带有FIFO、温度传感器和GPIO端口
• MAX157：+2.7V、低功耗、2通道、108ksps、串行10位ADC，8引脚µMAX封装
• MAX159：+2.7V、低功耗、2通道、108ksps、串行10位ADC，8引脚µMAX封装
• MAX1247：+2.7V、低功耗、4通道、串行12位ADC，QSOP-16封装
• MAX1246：+2.7V、低功耗、4通道、串行12位ADC，QSOP-16封装
• MAX149：+2.7V至+5.25V、低功耗、8通道、串行10位ADC

订购型号