• 简体中文
• English

MAX1508, MAX1508Y, MAX1508Z：线性Li+电池充电器，带有集成调整FET、热调节和ACOK，3mm x 3mm TDFN封装

The MAX1508 is an intelligent, stand-alone constant-current, constant-voltage (CCCV), thermally regulated linear charger for a single-cell lithium-ion (Li+) battery. The MAX1508 integrates the current-sense circuit, MOS pass element, and thermal-regulation circuitry, and also eliminates the reverse-blocking Schottky diode, to create the simplest and smallest charging solution for hand-held equipment. The MAX1508 functions as a stand-alone charger to control the charging sequence from the prequalification state through fast-charge, top-off charge, and full-charge indication. The MAX1508Y and MAX1508Z eliminate the prequalification state to allow startup into a load without a battery. Proprietary thermal-regulation circuitry limits the die temperature to +100°C when fast charging or while exposed to high ambient temperatures, allowing maximum charging current without damaging the IC. The MAX1508 achieves high flexibility by providing an adjustable fast-charge current by an external resistor. Other features include the charging status (active-low CHG) of the battery, an active-low control input (active-low EN) for the MAX1508 and MAX1508Z (active-high control input for the MAX1508Y), and an active-low input power-source detection output (active-low ACOK). The MAX1508 accepts a +4.25V to +13V supply, but disables charging when the input voltage exceeds +7V to protect against unqualified or faulty AC adapters. The MAX1508 operates over the extended temperature range (-40°C to +85°C) and is available in a compact 8-pin thermally enhanced 3mm x 3mm thin DFN package with 0.8mm height.

关键特性 Stand-Alone Linear 1-Cell Li+ Battery Charger No External FET, Reverse-Blocking Diode, or Current-Sense Resistor Required Programmable Fast-Charge Current (0.8A max) Proprietary Die-Temperature Regulation Control (+100°C) +4.25V to +13V Input Voltage Range with Input Overvoltage Protection (OVP) Above +7V Charge-Current Monitor for Fuel Gauging Low Dropout Voltage—130mV at 0.425A Input Power-Source Detection Output (Active-Low ACOK) Soft-Start Limits Inrush Current No Prequalification State for the MAX1508Y and MAX1508Z Charge Status Output (Active-Low CHG) for LED or Microprocessor Interface Small 3mm x 3mm 8-Pin Thin DFN Package, 0.8mm High Active-Low Charge Enable (Active-Low EN) (MAX1508 and MAX1508Z) Active-High Charge Enable (EN) (MAX1508Y)

MAX1508、MAX1508Y、MAX1508Z：典型工作电路 应用 Bluetooth®设备 蜂窝电话/无绳电话 充电托架和坞站 数码相机与MP3播放器 PDA USB应用

数据手册DataSheet

关键参数

开发工具

• MAX1507EVKIT
• MAX1508EVKIT

技术资料

• Understanding Li+ Battery Operation Lessens Charging Safety Concerns

质量和环境数据

• MAX1508.pdf

相关产品

• MAX1874：USB/AC适配器双路输入、单节Li+电池充电器，带OVP与温度调节
• MAX1555：SOT23封装、双输入、USB/AC适配器、单节Li+电池充电器
• MAX1551：SOT23封装、双输入、USB/AC适配器、单节Li+电池充电器
• MAX1501：高集成度、线性电池充电器，带有热调节，用于便携式应用
• MAX1898：线性充电器，用于单节Li+电池
• MAX1879：简单、高效率、1节Li+电池脉冲充电器
• MAX1811：USB供电的Li+充电器

订购型号