USB3813
The Microchip USB3813 is a low-power, OEM configurable, MTT (Multi-Transaction Translator) USB 2.0 hub controller with 3 downstream ports and advanced features for embedded USB applications. The USB3813 is fully compliant with the USB 2.0 Specification, USB 2.0 Link Power Management Addendum, High-Speed Inter-Chip (HSIC) USB Electrical Specification Revision 1.0, and will attach to an upstream port as a Full-Speed hub or as a Full-/Hi-Speed hub. The 3-port hub supports Low-Speed, Full-Speed, and Hi-Speed (if operating as a Hi-Speed hub) downstream devices on all of the enabled downstream (non-HSIC) ports. HSIC ports support only Hi-Speed operation.
The USB3813 has been specifically optimized for mobile embedded applications. The pin-count has been reduced by optimizing the USB3813 for mobile battery-powered embedded systems where power consumption, small package size, and minimal BOM are critical design requirements. Standby mode power has been minimized and reference clock inputs can be aligned to the customer’s specific mobile application. Flexible power rail options ease integration into energy efficient designs by allowing the USB3813 to be powered in a single-source (VBUS, VBAT, 3.3V) or a dual-source (VBAT + 1.8, 3.3V + 1.8) configuration. Additionally, all required resistors on the USB ports are integrated into the hub, including all series termination and pull-up/pull-down resistors on the D+ and D– pins.
The USB3813 supports both upstream battery charger detection and downstream battery charging. The USB3813 integrated battery charger detection circuitry supports the USB-IF Battery Charging (BC1.2) detection method and most Apple devices. These circuits are used to detect the attachment and type of a USB charger and provide an interrupt output to indicate charger information is available to be read from the device's status registers via the serial interface. The USB3813 provides the battery charging handshake and supports the following USB-IF BC1.2 charging profiles:
产品特性- Hub Controller IC with 3 downstream ports
- High-Speed Inter-Chip (HSIC) support
1 downstream HSIC port
- 1 downstream HSIC port
- USB-IF Battery Charger revision 1.2 support on up and downstream ports (DCP, CDP, SDP)
- Battery charging support for Apple® devices
- FlexConnect: Downstream port 1 able to swap with upstream port, allowing master capable devices to control other devices on the hub
- USB to I2C™/SPI bridge endpoint support
- USB Link Power Management (LPM) support
- SUSPEND pin for remote wakeup indication to host
- Vendor Specific Messaging (VSM) support
- Enhanced OEM configuration options available through OTP or SMBus Slave Port
- Flexible power rail support
VBUS or VBAT only operation
3.3V only operation
VBAT + 1.8V operation
3.3V + 1.8V operation
- VBUS or VBAT only operation
- 3.3V only operation
- VBAT + 1.8V operation
- 3.3V + 1.8V operation
- 30-ball (2.9x2.5mm) WLCSP, RoHS compliant package
- Mobile Phones
- Tablets
- Ultrabooks
- Digital Still Cameras
- Digital Video Cameras
- Gaming Consoles
- PDAs
- Portable Media Players
- GPS Personal Navigation Devices
- Media Players/Viewers
| 技术参数|
Parameter Name
Value
| Value | |
Upstream Port
USB 2.0
|
USB 2.0
| |
USB Speed
USB 2.0
|
USB 2.0
| |
Downstream Ports
3
|
3
| |
MGMT I/F
I2C
|
I2C
| |
ROM I/F
SPI
|
SPI
| |
Op Voltage (V)
3.3
|
3.3
| |
MultiTRAK Tech
Yes
|
Yes
| |
PortMap
Yes
|
Yes
| |
PortSwap
Yes
|
Yes
| |
PHYBoost
Yes
|
Yes
| |
Temp. Range Min.
-40
|
-40
| |
Temp. Range Max.
85
|
85
|
|
文档资料
| USB3813 USB 2.0 Hi-Speed 3-Port Hub Controller Optimized for Portable Applicati | Data Sheets | 05/01/2014 | 440KB | |
|
| AN 26.18 - Configuration Options for the USB253x / USB3x13 / USB46x4 | AppNote | 11/20/2015 | 891KB |  |
| AN 26.19 - USB Battery Charging with the USB253x/USB46x4/USB3x13 Hub Controllers | AppNote | 09/10/2014 | 470KB | |
| AN 26.2 - Implementation Guidelines for Microchip's USB 2.0 and USB 3.0 Hub Devices | AppNote | 08/11/2015 | 1203KB | |
| AN1589 - USB253x/USB46x4/USB3x13 Embedded Testing Modes | AppNote | 11/05/2013 | 505KB | |
| AN1700 - FlexConnect Applications | AppNote | 03/31/2015 | 243KB | |
| AN1940 - AN1940 USB to GPIO Bridging with Microchip USB 2.0 Hubs | AppNote | 03/03/2016 | 231KB | |
| AN1941 - AN1941 USB to I2C Bridging with Microchip USB 2.0 Hubs | AppNote | 03/03/2016 | 302KB | |
| AN1971 - AN1971 - USB to SPI Bridging with Microchip USB 2.0 Hubs | AppNote | 05/04/2016 | 592KB | |
| AN2083 - USB Commands for the USB253x/3x13/46x4 Hub Feature Controller | AppNote | 01/22/2016 | 120KB | |
| AN26.21 - USB Device Design Checklist | AppNote | 08/10/2015 | 386KB | |
|
| Protouch - USB Controller Hub Configuration Tool | Software Library | 03/07/2013 | | |
| USB2530 Windows SDK | Software Library | 05/14/2014 | | |
|
| EVB-USB3813-01 Evaluation Board Bill of Materials | BOM | 02/01/2014 | 61KB | |
|
| EVB-USB3813-01 Evaluation Board Schematic - OrCAD | CAD Resource | 02/01/2014 | 1019KB | |
|
| EVB-USB3613-01/EVB-USB3813-01 Evaluation Board Gerber Files | Gerber Files | 05/05/2012 | 576KB | |
|
| EVB-USB3813-01 Evaluation Board Schematic - PDF | Schematics | 02/01/2014 | 68KB | |
|
| EVB-USB3813 Evaluation Board User's Guide | User Guides | 09/12/2013 | 2278KB | |
订购型号
| Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
|---|
| USB3813-1080XY-TR | 30 | WLCSP | 0C to +70C | T/R | 3.73 | 3.11 | 2.82 | 2.73 | 2.70 |
| USB3813I-1080XY-TR | 30 | WLCSP | -40C to +85C | T/R | 4.72 | 3.93 | 3.58 | 3.45 | 3.42 |
相关开发工具
相类似产品
器件无铅环保信息
| PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
|---|
| USB3813-1080XY-TR | 0.021750 | 0.060000 | 30 | WLCSP | 2.9x2.5x0.57 | SAC | e1 |  |  |
| USB3813I-1080XY-TR | 0.021750 | 0.060000 | 30 | WLCSP | 2.9x2.5x0.57 | SAC | e1 | | |
