USB5734
Microchip’s USB5734 Smart hub is a 4 port, SuperSpeed (SS)/Hi-Speed (HS), low power, configurable and fully compliant with the USB 3.1 Gen 1 specification. The USB5734 also supports Full Speed (FS) and Low Speed (LS) USB signaling, offering complete coverage of all defined USB operating speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 controller, so 5 Gbps SuperSpeed data transfers are not affected by slower USB 2.0 traffic.
The USB5734 is also a Smart Hub which is defined as a USB hub that integrates system levels functions typically associated with a separate MCU or processor. Microchip’s USB5734 Smart Hub enables communication to other peripherals in addition to USB. This I/O bridging capability allows the host to seamlessly interface to peripherals via I2C, SPI, GPIOs or a UART over USB. Microchip’s Smart hubs also enable a downstream device to take control of the host system by swapping roles and becoming the host port. The Smart hub can also switch between two different hosts if required. This role changing technology is called FlexConnect and can be initiated through hardware or software commands.
Smart hubs also supports custom configurations of external ports and GPIO pins. ProTouch2, Microchip’s proprietary software utility, can be used to program On-chip One Time Programmable (OTP) ROM which stores required register settings to ensure the desired start up configuration at power on. All LED, GPIOs and port control signal pins are under firmware control, allowing for maximum operational flexibility. However, for even more simplicity, the USB5734 can be configured through a series of external low-cost resistor bootstraps. A handful of bootstap pins are available on the USB5734 to enable standard configurations for GPIOs and downstream ports. No OTP programming required..
产品特性- Four downstream USB3.1 Gen1/2.0 ports
- Integrated Hub Feature Controller (HFC) enabling I/O Bridging and FlexConnect
- I/O Bridging: Host communication to external peripherals
USB to I2C/UART/SPI/GPIO bridge endpoint support
- USB to I2C/UART/SPI/GPIO bridge endpoint support
- FlexConnect: Host port Swapping and Switching to downstream Devices
- Battery Charging: USB-IF revision 1.2 support on downstream ports (DCP, CDP, SDP)
Simultaneous data transfer for 2500 mA of High Speed charging
Enables charging from a mobile platform that is powered-off
- Simultaneous data transfer for 2500 mA of High Speed charging
- Enables charging from a mobile platform that is powered-off
- Port Config Straps: Predefined configuration of port settings – Battery Charging, Non-Removable, Disable
- Application Straps: Predefined configuration of GPIOs for specific Use Cases
Mixed Mode – includes I2C, FlexConnect and general purpose FlexConnect
FlexConnect Mode – enable FlexConnect via both h/w and s/ control
Port Speed Mode – use of LED to differentiate between Full, High and Superspeed
Port BC Mode – use of LED to differentiate between BC1.2 and standard USB charging
UART Mode – provides necessary signals to support DB9 UART interface
- Mixed Mode – includes I2C, FlexConnect and general purpose FlexConnect
- FlexConnect Mode – enable FlexConnect via both h/w and s/ control
- Port Speed Mode – use of LED to differentiate between Full, High and Superspeed
- Port BC Mode – use of LED to differentiate between BC1.2 and standard USB charging
- UART Mode – provides necessary signals to support DB9 UART interface
- ProTouch2: Configuration tool to enable enhanced OEM configuration options through either One-Time Programmable (OTP) (8Kbit) or external SPI ROM
- Manufacturing line programming tool and field update capabilities
- USB Link Power Management (LPM) support
- IETF RFC 4122 compliant 128-bit UUID
- Compatible with Microsoft® Windows® 8/8.1 and other major OS’s
- 64-pin (9 x 9 mm) SQFN lead-free, RoHS compliant package
- Industrial grade temperature support (-40°C to +85°C)
- Automotive quality and PPAP support
- Expansion Hubs
- Docking Stations
- LCD Monitors
- HDTVs
| 技术参数
Parameter Name
Value
| Value |
Upstream Port
USB 3.1 Gen 1
|
USB 3.1 Gen 1
|
USB Speed
USB 3.1 Gen 1
|
USB 3.1 Gen 1
|
Downstream Ports
4
|
4
|
MGMT I/F
I2C
|
I2C
|
ROM I/F
SPI
|
SPI
|
Op Voltage (V)
3.3
|
3.3
|
MultiTRAK Tech
Yes
|
Yes
|
PortMap
Yes
|
Yes
|
PortSwap
Yes
|
Yes
|
TrueSpeed
Yes
|
Yes
|
PHYBoost
Yes
|
Yes
|
Temp. Range Min.
-40
|
-40
|
Temp. Range Max.
85
|
85
|
|
文档资料
USB5734 - 4-Port SS/HS USB Hub Controller - Data Sheet | Data Sheets | 06/20/2016 | 706KB | |
|
AN 26.2 - Implementation Guidelines for Microchip's USB 2.0 and USB 3.0 Hub Devices | AppNote | 08/11/2015 | 1203KB | |
AN1700 - FlexConnect Applications | AppNote | 03/31/2015 | 243KB | |
AN1903 - AN1903 Configuration Options for the USB5734, USB5744 and USB5742 | AppNote | 06/22/2016 | 239KB | |
AN1905 - USB Battery Charging with the USB57x4 Hub Controller Family | AppNote | 07/13/2015 | 327KB | |
AN1997 - USB to GPIO Bridging with Microchip USB 3.1 Gen 1 Hubs | AppNote | 09/22/2015 | 200KB | |
AN1998 - USB to I2C Bridging with Microchip USB 3.1 Gen 1 Hubs | AppNote | 09/22/2015 | 240KB | |
AN1999 - USB to SPI Bridging with Microchip USB 3.1 Gen 1 Hubs | AppNote | 09/22/2015 | 573KB | |
AN2000 - USB to UART Bridging with Microchip USB 3.1 Gen 1 Hubs | AppNote | 09/22/2015 | 96KB | |
AN2050 - Disabling USB 3.1 Gen 1 Portion of Downstream Ports on Microchip USB57x4 Hubs | AppNote | 01/12/2016 | 215KB | |
AN2051 - Microchip USB57xx USB Type-C Applications | AppNote | 01/13/2016 | 179KB | |
AN26.16 - USB Super Speed Receiver Jitter Tolerance | AppNote | 04/25/2014 | 422KB | |
AN26.21 - USB Device Design Checklist | AppNote | 08/10/2015 | 386KB | |
|
USB57XX Sell Sheet | Brochures | 11/24/2015 | 1473KB | |
|
ProTouch2 USB57X4 Linux SDK | Software Library | 12/15/2015 | | |
ProTouch2 USB57X4 MAC SDK | Software Library | 12/15/2015 | | |
Protouch2_V1.5_SmartHub_Configuration_Programming_Bridging_Tool | Software Library | 08/20/2015 | | |
Protouch2_V1.6_SmartHub_Configuration_Programming_Bridging_Tool | Software Library | 04/01/2016 | | |
订购型号
Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
---|
USB5734/MR | 64 | QFN | 0C to +70C | TRAY | 5.76 | 4.80 | 4.36 | 4.22 | 4.17 |
USB5734-I/MR | 64 | QFN | -40C to +85C | TRAY | 7.20 | 6.00 | 5.46 | 5.27 | 5.21 |
USB5734T/MR | 64 | QFN | 0C to +70C | T/R | 5.85 | 4.88 | 4.44 | 4.28 | 4.24 |
USB5734T-I/MR | 64 | QFN | -40C to +85C | T/R | 7.30 | 6.08 | 5.53 | 5.34 | 5.28 |
相关开发工具
相类似产品
器件无铅环保信息
PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
---|
USB5734/MR | 0.232400 | 1.769231 | 64 | QFN | 9x9x0.9mm | Matte Tin | e3 | | |
USB5734REL/MR | 0.232400 | 1.769231 | 64 | QFN | 9x9x0.9mm | Matte Tin | e3 | | |
USB5734-I/MR | 0.232400 | 1.769231 | 64 | QFN | 9x9x0.9mm | Matte Tin | e3 | | |
USB5734T-I/MR | 0.232400 | 0.370303 | 64 | QFN | 9x9x0.9mm | Matte Tin | e3 | | |
USB5734T/MR | 0.232400 | 0.370303 | 64 | QFN | 9x9x0.9mm | Matte Tin | e3 | | |