• 简体中文
• English

LTC1421 - Hot Swap Controller

A programmable electronic circuit breaker protects agianst shorts. Warning signals indicate that the circuit breaker has tripped, a power failure has occurred or that the switch drivers are turned off. The reset output can be used to generate a system reset when the power cycles or a fault occurs. The two connect inputs can be used with staggered connector pins to indicate board insertion or removal. The power-on reset input can be used to cycle the board power or claer the circuit breaker.

The trip point of the ground sense comparator is set at 0.1V for LTC1421 and 2.5V for LTC1421-2.5.

The LTC1421/LTC1421-2.5 are available in 24-pin SO and SSOP packages.

Features Allows Safe Board Insertion and Removal from a Live Backplane System Reset and Power Good Control Outputs Programmable Electronic Circuit Breaker User Programmable Supply Voltage Power-Up Rate High Side Driver for Two External N-Channels Controls Supply Voltages from 3V to 12V Connection Inputs Detect Board Insertion or Removal Undervoltage Lockout Power-On Reset Input Typical Application

Applications Hot Board Insertion Electronic Circuit Breaker Packaging

Order Information

Demo Boards

Companion Boards