LTC3676/LTC3676-1 - Power Management Solution for Application Processors

The LTC®3676 is a complete power management solution for advanced portable application processor-based systems. The device contains four synchronous step-down DC/DC converters for core, memory, I/O, and system on-chip (SoC) rails and three 300mA LDO regulators for low noise analog supplies. The LTC3676-1 has a ±1.5A buck regulator configured to support DDR termination plus a VTTR reference output. An I2C serial port is used to control regulator enables, power-down sequencing, output voltage levels, dynamic voltage scaling, operating modes and status reporting.

Regulator start-up is sequenced by connecting outputs to enable pins in the desired order or via the I2C port. System power-on, power-off and reset functions are controlled by pushbutton interface, pin inputs, or I2C.

The LTC3676 supports i.MX, PXA and OMAP processors with eight independent rails at appropriate power levels. Other features include interface signals such as the VSTB pin that toggles between programmed run and standby output voltages on up to four rails simultaneously. The device is available in a 40-lead 6mm × 6mm QFN and 48‑lead exposed pad LQFP packages.

Features
  • Quad I2C Adjustable High Efficiency Step Down DC/DC Converters: 2.5A, 2.5A, 1.5A, 1.5A
  • Three 300mA LDO Regulators (Two Adjustable)
  • DDR Power Solution with VTT and VTTR Reference
  • Pushbutton ON/OFF Control with System Reset
  • Independent Enable Pin-Strap or I2C Sequencing
  • Programmable Autonomous Power-Down Control
  • Dynamic Voltage Scaling
  • Power Good and Reset Functions
  • Selectable 2.25MHz or 1.12MHz Switching Frequency
  • Always Alive 25mA LDO Regulator
  • 12μA Standby Current
  • Low Profile 40-Lead 6mm × 6mm QFN and 48-Lead Exposed Pad LQFP
Typical Application
LTC3676 Typical Application
LTC3676 Typical Application
Applications
  • Supports Freescale i.MX6, ARM Cortex, and Other Application Processors
  • Handheld Instruments and Scanners
  • Portable Industrial and Medical Devices
  • Automotive Infotainment
  • High End Consumer Devices
  • Multi-Rail Systems
Packaging
LTC3676 Package Drawing
LTC3676 Package Drawing
LTC3676 Package Drawing
LTC3676 Package Drawing
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTC3676ELXE-1#PBF7x7 LQFP-48E$8.22$5.75
LTC3676ELXE#PBF7x7 LQFP-48E$8.22$5.75
LTC3676EUJ-1#PBF6x6 QFN-40E$7.86$5.50
LTC3676EUJ-1#TRPBF6x6 QFN-40E$5.56
LTC3676EUJ#PBF6x6 QFN-40E$7.86$5.50
LTC3676EUJ#TRPBF6x6 QFN-40E$5.56
LTC3676HLXE-1#PBF7x7 LQFP-48H$9.79$6.85
LTC3676HLXE#PBF7x7 LQFP-48H$9.79$6.85
LTC3676HUJ-1#PBF6x6 QFN-40H$9.43$6.60
LTC3676HUJ-1#TRPBF6x6 QFN-40H$6.66
LTC3676HUJ#PBF6x6 QFN-40H$9.43$6.60
LTC3676HUJ#TRPBF6x6 QFN-40H$6.66
LTC3676ILXE-1#PBF7x7 LQFP-48I$9.43$6.60
LTC3676ILXE#PBF7x7 LQFP-48I$9.43$6.60
LTC3676IUJ-1#PBF6x6 QFN-40I$9.07$6.35
LTC3676IUJ-1#TRPBF6x6 QFN-40I$6.41
LTC3676IUJ#PBF6x6 QFN-40I$9.07$6.35
LTC3676IUJ#TRPBF6x6 QFN-40I$6.41
Demo Boards
Part NumberDescriptionPrice
DC1976A-ALTC3676EUJ Demo Board | PMIC for Application Processors: 4 Bucks, 4 LDOs, I2C Control (req DC2026)$150.00
DC1976A-BLTC3676EUJ-1 Demo Board | PMIC with DDR DC/DC for Application Processors: 4 Bucks, 4 LDOs, I2C Control (req DC2026)Contact Factory
Companion Boards
Part NumberDescriptionPrice
DC2026CLinduino One Isolated USB Demo Board: An Arduino- and QuikEval-Compatible Code Development Platform$75.00
Datasheet
Reliability Data
Product Selector Card
Press Release
Software and Simulation
CAD Symbol
Linduino
Related Products
LTC3676/LTC3676-1 - Power Management Solution for Application Processor
多输出电源管理 IC 进一步简化汽车信息娱乐系统设计
用 IC 给移动设备供电变得更容易了
面向 i.MX6、ARM、Cortex 和其他先进便携式应用处理器系统的完整电源管理 IC 解决方案
R526 - Reliability Data
LTC3676/LTC3676-1 PMIC Reference Design Based on NXP i.MX 6 Series Processors
New PMIC for Advanced Application Processors
Complete Power Management IC Solutions for i.MX6, ARM Cortex & Other Advanced Portable Application Processor Systems
i.MX6 Novtech Reference Design
LTC3676 Driver Beta
LTC3676 Driver Linux
LTC3676 Footprints and Symbols
LTC3676 - DC1976A Linduino.INO File
LTC3676 - Linduino Header File
LTC3676 - Linduino.CPP File