• 简体中文
• English

LTC3861 - Dual, Multiphase Step-Down Voltage Mode DC/DC Controller with Accurate Current Sharing

The LTC®3861 is a dual PolyPhase® synchronous stepdown switching regulator controller for high current distributed power systems, digital signal processors, and other telecom and industrial DC/DC power supplies. It uses a constant-frequency voltage mode architecture combined with very low offset, high bandwidth error amplifiers and a remote output sense differential amplifier per channel for excellent transient response and output regulation.

The controller incorporates lossless inductor DCR current sensing to maintain current balance between phases and to provide overcurrent protection. The chip operates from a VCC supply between 3V and 5.5V and is designed for stepdown conversion from VIN between 3V and 24V to output voltages between 0.6V and VCC – 0.5V.

The TRACK/SS pins provide programmable soft-start or tracking functions. Inductor current reversal is disabled during soft-start to safely power prebiased loads. The constant operating frequency can be synchronized to an external clock or linearly programmed from 250kHz to 2.25MHz. Up to six LTC3861 controllers can operate in parallel for 1-, 2-, 3-, 4-, 6- or 12-phase operation.

The LTC3861 is available in a 36-pin 5mm × 6mm QFN package. LTC3861-1 is a 32-pin QFN version of the LTC3861, which has a single differential remote output voltage sense amplifier.

Features Operates with Power Blocks, DrMOS or External Gate Drivers and MOSFETs Constant-Frequency Voltage Mode Control with Accurate Current Sharing ±0.75% 0.6V Voltage Reference Dual Differential Output Voltage Sense Amplifiers Multiphase Capability—Up to 12-Phase Operation Programmable Current Limit Safely Powers a Prebiased Load Programmable or PLL-Synchronizable Switching Frequency Up to 2.25MHz Lossless Current Sensing Using Inductor DCR or Precision Current Sensing with Sense Resistor VCC Range: 3V to 5.5V VIN Range: 3V to 24V Power Good Output Voltage Monitor Output Voltage Tracking Capability Programmable Soft-Start Available in a 36-Pin 5mm × 6mm QFN Package Typical Application

Applications High Current Distributed Power Systems DSP, FPGA and ASIC Supplies Datacom and Telecom Systems Industrial Power Supplies Packaging

Order Information

Demo Boards