LTM4632 - Ultrathin, Triple Output, Step-Down μModule Regulator for DDR-QDR4 Memory

The LTM®4632 is an ultrathin triple output step-down μModule® (power module) regulator to provide complete power solution for DDR-QDR4 SRAM. Operating from a 3.6V to 15V input voltage, the LTM4632 supports two ±3A output rails, both sink and source capable, for VDDQ and VTT, plus a 10mA low noise reference VTTR output. Both VTT and VTTR track and are equal to VDDQ/2. Housed in a 6.25mm × 6.25mm × 1.82mm LGA and 6.25mm × 6.25mm × 2.42mm BGA packages, the LTM4632 includes the switching controller, power FETs, inductors and support components. Alternatively, the power module can also be configured as a two phase single ±6A output VTT. Only a few ceramic input and output capacitors are needed to complete the design.

The LTM4632 supports selectable Burst Mode operation (CH1 only) and output voltage tracking for supply rail sequencing. Its high switching frequency and current mode control enable a very fast transient response to line and load changes without sacrificing stability.

Fault protection features include overvoltage input, overcurrent and overtemperature protection.

The LTM4632 is RoHS compliant with Pb-free finish.

Features
  • Complete DDR-QDR4 SRAM Power Solution Including VDDQ, VTT, VTTR (or VREF)
  • Solution in 0.5cm2 (Dual-Sided PCB)
  • Wide Input Voltage Range: 3.6V to 15V
  • 3.3V Input Compatible with VIN Tied to INTVCC
  • 0.6V to 2.5V Output Voltage Range
  • Dual ±3A DC Output Current with Sink and Source Capability
  • ±1.5%, ±10mA Buffered VTTR = VDDQ/2 Output
  • 3A VDDQ + 3A VTT or Dual Phase Single 6A VTT
  • ±1.5% Maximum Total Output Voltage Regulation Error Over Load, Line and Temperature
  • Current Mode Control, Fast Transient Response
  • External Frequency Synchronization
  • Multiphase Parallelable with Current Sharing
  • Selectable Burst Mode® Operation
  • Overvoltage Input and Overtemperature Protection
  • Power Good Indicator
  • Ultrathin 6.25mm × 6.25mm × 1.82mm LGA and 6.25mm × 6.25mm × 2.42mm BGA Packages
Typical Application
LTM4632 Typical Application
LTM4632 Typical Application
Applications
  • DDR Memory Power Supply
  • General Purpose Point of Load Conversion
  • Telecom, Networking and Industrial Equipment
Packaging
LTM4632 Package Drawing
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTM4632EV#PBF6.25mm x 6.25mm x 1.82mm LGAE$10.50$7.35
LTM4632EY#PBF6.25mm x 6.25mm x 2.42mm BGAE$11.02$7.71
LTM4632IV#PBF6.25mm x 6.25mm x 1.82mm LGAI$11.56$8.09
LTM4632IY#PBF6.25mm x 6.25mm x 2.42mm BGAI$12.07$8.45
Demo Boards
Part NumberDescriptionPrice
DC2367ALTM4632 Demo Board | Ultrathin Triple Output Buck μModule Regulator for DDR-QDR4 Memory, 3.6V ≤ VIN ≤ 15V, ±3A VDDQ/VTT, 10mA VREF$65.00
Datasheet
Design Note
Product Selector Card
LT Journal
Press Release
CAD Symbol
LTspice
Related Products
LTM4632 - Ultrathin, Triple Output, Step-Down μModule Regulator for DDR-QDR4 Memory
DN551 - 用于 DDR、QDR 和 QDR-IV SRAM 的超薄型三路输出 μModule 稳压器可安放在 0.5cm2 面积内和 PCB 的背面
用于 DDR 和 QDR4 SRAM 的 µModule 稳压器工作在 3.3VIN 至 15VIN 并可安放在 0.5cm2 PCB 面积内
DN551 - Ultrathin Triple Output μModule Regulator for DDR, QDR and QDR-IV SRAM Fits 0.5cm2 Area and Backside of PCB
Thinner & Smaller Power Circuits for PCIe Boards
Ultrathin Triple Output µModule Regulator for DDR, QDR and QDR-IV SRAM Fits 0.5cm2 Area and Backside of PCB
µModule Regulator for DDR & QDR4 SRAM Operates from 3.3VIN to 15VIN, Fits in 0.5cm² PCB
LTM4632 Footprints and Symbols
LTM4632 Demo Circuit - Triple Output Ultrathin Buck Regulator for DDR-QDR4 (3.6-15V to 1.5V @ 3A, 0.75V @ ±3A, 0.75V @ 10mA)