FastECoax7501
The FastECoax-7502.2 Ethernet over coaxial cable adapters transmits 10/100base-T Ethernet over standard coaxial cables. These adapters are installed in pairs. The "Head-End" adapter takes conventional 100base-T Ethernet & power from a PoE compliant Ethernet switch, a PoE injector or an AC adapter. Power and bidirectional data is passed over the coax to the "Camera-Side" adapter at the far end which in turn optionally powers the IP camera.
Features- Utilizes existing analog video cabling (75-ohm coax)
- Fully compliant to 100BaseT Full duplex Ethernet
- Supports pass through link status
- Supports Full 100Mbps FDX up to 250m over RG6 coax (cable dependent)
- Supports 10/100base-T Ethernet for SD & HD video cameras
- Supports Power-over-Ethernet (PoE)
- Optional DC input for power pas through
- Optional DC output to power remote device
- Small Enclosure (70mm x 37mm) can be wall mounted
| Parameter|
Parameter Name
Value
| Value | |
Temp Range (°C)
0 to 50
|
0 to 50
| |
Storage Temp Range (°C)
-20 to 70
|
-20 to 70
| |
Distance (meters)
250m over RG6 @ 100Mbps
|
250m over RG6 @ 100Mbps
| |
Downlink Speed
100Mbps
|
100Mbps
| |
Uplink Speed
100Mbps
|
100Mbps
| |
Supply Voltage
12VDC or 24VDC
|
12VDC or 24VDC
| |
Power over Coax (mW)
PoE complaint
|
PoE complaint
| |
Interface Connector
RJ-45 to 75? BNC
|
RJ-45 to 75? BNC
|
|
Documents
Ordering Information
| Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
|---|
| EQCO-FASTECOAX7501.2 | 0 | MODULE | 0C to +50C | BOX | 125.00 | 118.75 | 112.81 | 107.17 | 101.81 |
Similar Devices
RoHS Information
| PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
|---|
| EQCO-FASTECOAX7501.2 | | 100.000000 | 0 | ASMB | Varies | N/A | - |  |  |
