Features- Up to 10 MIPS Performance
- C compiler optimized RISC architecture
- 8x8 Single Cycle Hardware Multiply
- Internal oscillator support-31 kHz to 8MHz
- Voltage range; 2.0V to 3.6V
- An integrated LCD driver module, capable of driving 48 segments and 4 commons for LCD display (132 pixels)
- Integrated LCD Voltage Boost Regulator
- Run, Idle and down to 0.1uA SLEEP modes
- 10-bit ADC, 12 channels, 100K samples per second
- Programmable Low Voltage Detection Module
- Programmable Brown-out-Reset Module
- Two Analog Comparators
- Master Synchronous Serial Port supports SPI™ and I2C™ master and slave mode
- EUSART module including LIN bus support
- Four Timer Modules
- Two CCP
| Parameter
Parameter Name
Value
| Value |
Program Memory Type
Flash
|
Flash
|
Program Memory (KB)
8
|
8
|
CPU Speed (MIPS)
10
|
10
|
RAM Bytes
1,024
|
1,024
|
Digital Communication Peripherals
2-UART, 2-A/E/USART, 1-SPI, 1-I2C1-MSSP(SPI/I2C)
|
2-UART, 2-A/E/USART, 1-SPI, 1-I2C1-MSSP(SPI/I2C)
|
Capture/Compare/PWM Peripherals
2 CCP
|
2 CCP
|
Timers
1 x 8-bit, 3 x 16-bit
|
1 x 8-bit, 3 x 16-bit
|
ADC
12 ch, 10-bit
|
12 ch, 10-bit
|
Comparators
2
|
2
|
Segment LCD (pixels)
132
|
132
|
Temperature Range (C)
-40 to 85
|
-40 to 85
|
Operating Voltage Range (V)
2 to 3.6
|
2 to 3.6
|
Pin Count
64
|
64
|
|