Features- Up to 10 MIPS Performance
- C compiler optimized RISC architecture
- 8x8 Single Cycle Hardware MultiplySystem:
- Internal oscillator support-31 kHz to 8MHz, up to 32 MHz with 4xPLL
- Fail-Safe Clock Monitor- allows safe shutdown if clock fails
- Watchdog Timer with separate RC oscillator
- Wide operating Voltage range; 2.0V to 5.5VLCD Module
- An integrated LCD driver module, capable of driving 48 segments and 4 commons for LCD displaynanoWatt Power Managed Modes
- Run, Idle and SLEEP modesAnalog Features:
- 12-bit ADC, 12 channels, 50K samples per second
- Programmable Low Voltage Detection Module
- Programmable Brown-out-Reset module
- Two Analog ComparatorsPeripherals:
- Master Synchronous Serial Port supports SPI™ and I2C™ master and slave mode
- EUSART module including LIN bus support
- Four Timer Modules
- Two CCP
| Parameter|
Parameter Name
Value
| Value | |
Program Memory Type
Flash
|
Flash
| |
Program Memory (KB)
16
|
16
| |
CPU Speed (MIPS)
8
|
8
| |
RAM Bytes
768
|
768
| |
Digital Communication Peripherals
2-UART, 2-A/E/USART, 1-SPI, 1-I2C1-MSSP(SPI/I2C)
|
2-UART, 2-A/E/USART, 1-SPI, 1-I2C1-MSSP(SPI/I2C)
| |
Capture/Compare/PWM Peripherals
2 CCP
|
2 CCP
| |
Timers
1 x 8-bit, 3 x 16-bit
|
1 x 8-bit, 3 x 16-bit
| |
ADC
12 ch, 12-bit
|
12 ch, 12-bit
| |
Comparators
2
|
2
| |
Segment LCD (pixels)
192
|
192
| |
Temperature Range (C)
-40 to 85
|
-40 to 85
| |
Operating Voltage Range (V)
2 to 5.5
|
2 to 5.5
| |
Pin Count
80
|
80
|
|
