SN65HVD233-EP 增强型产品 3.3V CAN 收发器
The SN65HVD233 is used in applications employing the controller area network (CAN) serial communication physical layer in accordance with the ISO 11898 standard. As a CAN transceiver, it provides transmit and receive capability between the differential CAN bus and a CAN controller, with signaling rates up to 1 Mbps.
Designed for operation in especially harsh environments, the device features cross-wire, overvoltage and loss of ground protection to ±36 V, with overtemperature protection and common-mode transient protection of ±100 V. This device operates over a –7-V to 12-V common-mode range with a maximum of 60 nodes on a bus.
If the common-mode range is restricted to the ISO-11898 Standard range of –2 V to 7 V, up to 120 nodes may be connected on a bus
|
SN65HVD233-EP |
| Isolated |
No |
| Supply Voltage(s)(V) |
3.3 |
| Rating |
HiRel Enhanced Product |
| Transient Pulse Protection(V) |
-100 to 100 |
| Operating Temperature Range(°C) |
-55 to 125 |
| Footprint |
PCA82C250, excludes pin5 |
| ICC(Max)(mA) |
6 |
| Pin/Package |
8SOIC |
| Drivers Per Package |
1 |
| Receivers Per Package |
1 |
SN65HVD233-EP 特性
- Bus-Pin Fault Protection Exceeds ±36 V
- Bus-Pin ESD Protection Exceeds 16-kV HBM
- Compatible With ISO 11898
- Signaling Rates(1) up to 1 Mbps
- Extended –7-V to 12-V Common-Mode Range
- High-Input Impedance Allows for 120 Nodes
- LVTTL I/Os Are 5-V Tolerant
- Adjustable Driver Transition Times for Improved Signal Quality
- Unpowered Node Does Not Disturb the Bus
- Low-Current Standby Mode . . . 200-µA Typical
- Thermal Shutdown Protection
- Power-Up/Down Glitch-Free Bus Inputs and Outputs
- High Input Impedance With Low VCC
- Monolithic Output During Power Cycling
- Loopback for Diagnostic Functions Available
- DeviceNet Vendor ID #806(1)
- SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
SN65HVD233-EP 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| SN65HVD233MDREP |
ACTIVE |
-55 to 125 |
3.75 | 100u |
SOIC (D) | 8 |
2500 | LARGE T&R |
|
| V62/09611-01XE |
ACTIVE |
-55 to 125 |
3.75 | 100u |
SOIC (D) | 8 |
2500 | LARGE T&R |
|
SN65HVD233-EP 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| SN65HVD233MDREP |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65HVD233MDREP |
SN65HVD233MDREP |
| V62/09611-01XE |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
V62/09611-01XE |
V62/09611-01XE |
SN65HVD233-EP 应用技术支持与电子电路设计开发资源下载
- SN65HVD233-EP 数据资料 dataSheet 下载.PDF
- TI 德州仪器CAN选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- 使用 TI 的 SN65HVD233-EP 收发器改善 CAN 网络安全性 (zhct033.PDF, 299 KB)
- Isolated CAN Reference Design (PDF 48 KB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Isolated CAN EVM User's Guide (PDF 1168 KB)
- Energy Harvesting: Solar Solutions Guide (PDF 409 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
SN65HVD233-EP 工具与软件
| 培训内容 |
型号 |
软件/工具类型 |
| 通过 CAN 总线进行工业控制的演示平台 |
CANBUS-DEMO |
硬件参考设计 |
