TFP410 PanelBus DVI 发送器 165MHz
The TFP410 is a Texas Instruments PanelBus flat panel display product, part of a comprehensive family of end-to-end DVI 1.0-compliant solutions, targeted at the PC and consumer electronics industry.
The TFP410 provides a universal interface to allow a glue-less connection to most commonly available graphics controllers. Some of the advantages of this universal interface include selectable bus widths, adjustable signal levels, and differential and single-ended clocking. The adjustable 1.1-V to 1.8-V digital interface provides a low-EMI, high-speed bus that connects seamlessly with 12-bit or 24-bit interfaces. The DVI interface supports flat panel display resolutions up to UXGA at 165 MHz in 24-bit true color pixel format
|
TFP410 |
| Serial Data Receiver Channels |
3 |
| Number of Parallel Outputs |
24 |
| PLL Frequency(MHz) |
25 to 165 |
| Data Throughput(MB/s) |
495 |
| ICC(mA) |
250 |
| Operating Temperature Range(°C) |
0 to 70 |
| Supply Voltage(s)(V) |
3.3 |
| Pin/Package |
64HTQFP |
| Rating |
Catalog |
TFP410 特性
- Digital Visual Interface (DVI) Compliant1
- Supports Resolutions From VGA to UXGA (25 MHz – 165 MHz Pixel Rates)
- Universal Graphics Controller Interface
- 12-Bit, Dual-Edge and 24-Bit, Single-Edge Input Modes
- Adjustable 1.1 V to 1.8 V and Standard 3.3 V CMOS Input Signal Levels
- Fully Differential and Single-Ended Input Clocking Modes
- Standard Intel 12-Bit Digital Video Port Compatible as on Intel™ 81x Chipsets
- Enhanced PLL Noise Immunity
- On-Chip Regulators and Bypass Capacitors for Reducing System Costs
- Enhanced Jitter Performance
- No HSYNC Jitter Anomaly
- Negligible Data-Dependent Jitter
- Programmable Using I2C Serial Interface
- Monitor Detection Through Hot-Plug and Receiver Detection
- Single 3.3-V Supply Operation
- 64-Pin TQFP Using TI’s PowerPAD™ Package
- TI’s Advanced 0.18 um EPIC-5™ CMOS Process Technology
- Pin Compatible With SiI164 DVI Transmitter
TFP410 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| TFP410PAP |
ACTIVE |
0 to 70 |
3.00 | 1ku |
HTQFP (PAP) | 64 |
160 | JEDEC TRAY (10+1) |
|
| TFP410PAPG4 |
ACTIVE |
0 to 70 |
3.00 | 1ku |
HTQFP (PAP) | 64 |
160 | JEDEC TRAY (10+1) |
|
TFP410 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| TFP410PAP |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TFP410PAP |
TFP410PAP |
| TFP410PAPG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TFP410PAPG4 |
TFP410PAPG4 |
TFP410 应用技术支持与电子电路设计开发资源下载
- TFP410 数据资料 dataSheet 下载.PDF
- TI 德州仪器PanelBus (DVI)选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- 使用 TI 的 TFP410 收发器改善 CAN 网络安全性 (zhct033.PDF, 299 KB)
- Isolated CAN Reference Design (PDF 48 KB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Isolated CAN EVM User's Guide (PDF 1168 KB)
- Energy Harvesting: Solar Solutions Guide (PDF 409 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
TFP410 工具与软件
| 培训内容 |
型号 |
软件/工具类型 |
| 通过 CAN 总线进行工业控制的演示平台 |
CANBUS-DEMO |
硬件参考设计 |
