TUSB6020 USB 2.0 High-Speed On-the-Go Local Bus Interface Bridge Controller

USB On-the-Go (OTG) Controller Core
- Uses Mentor Graphics USB 2.0 OTG Core
- Dual-Role Controller Can Operate Either as a Function Controller for a USB Peripheral or as the Host/Peripheral in Point-to-Point or Multipoint Communications With Other USB Functions
- Compliant With the USB 2.0 Standard for High-Speed (480-Mbps) Functions and With OTG Supplement to USB 2.0 Specification
- Supports OTG Communications With One or More High-, Full-, or Low-Speed Devices
- Supports Session Request Protocol (SRP) and Host Negotiation Protocol (HNP)
- Supports Suspend-and-Resume Signaling
- Configurable for up to 4 Transmit Endpoints or up to 4 Receive Endpoints
- Configurable FIFOs, Including the Option of Dynamic FIFO Sizing
- 16k-Byte RAM for USB Endpoint FIFO Shared by USB In/Out Endpoints
- Support for External Direct Memory Access (DMA) to FIFOs
- Soft Connect/Disconnect Option
- Performs All Transaction Scheduling in Hardware
System Control Module
- Controls Clock and Reset Generation and Distribution
- Controls and Observes Device Power States
- Supports External Power Management
Integrated USB 2.0 OTG PHY
- Fully Compliant with USB 2.0 Standard and USB 2.0 Transceiver Macrocell Interface (UTMI) Revision 1.05
- Optimized One-Port Operation at Low Speed (1.5 Mbps), Full Speed (12 Mbps), and High Speed (480 Mbps)

TUSB6020 芯片订购指南

器件	状态	温度	价格	封装 \| 引脚	封装数量 \| 封装载体	丝印标记
TUSB6020PFC	ACTIVE	0 to 70	7.20 \| 1ku	TQFP (PFC) \| 80	96 \| JEDEC TRAY (5+1)
TUSB6020PFCG4	ACTIVE	0 to 70	7.20 \| 1ku	TQFP (PFC) \| 80	96 \| JEDEC TRAY (5+1)
TUSB6020PFCR	ACTIVE	0 to 70	6.00 \| 1ku	TQFP (PFC) \| 80	1000 \| LARGE T&R
TUSB6020PFCRG4	ACTIVE	0 to 70	6.00 \| 1ku	TQFP (PFC) \| 80	1000 \| LARGE T&R
TUSB6020ZQE	ACTIVE	0 to 70	7.20 \| 1ku	BGA MICROSTAR JUNIOR (ZQE) \| 80	360 \| JEDEC TRAY (10+1)
TUSB6020ZQER	ACTIVE	0 to 70	6.00 \| 1ku	BGA MICROSTAR JUNIOR (ZQE) \| 80	2500 \| LARGE T&R