MCP2003A
For product comparison, please consider:
Stand-alone LIN Transceiver -- MCP200X family members; 8-pin PDIP, DFN and SOIC packages - MCP2003/3A-LIN-compatible driver with WAKE pin -- MCP2004/4A-LIN-compatible driver with FAULT/TXE pin. -- This device provides a bidirectional, half-duplex communication physical interface to automotive, and industrial LIN systems to meet the LIN bus specification Revision 2.1 and SAE J2602. The device is short circuit and overtemp protected by internal circuitry. The device has been specifically designed to operate in the automotive operating environment and will survive all specified transient conditions while meeting all of the stringent quiescent current requirements.
Features- The MCP2003/3A and MCP2004/4A are compliant with LIN Bus Specifications 1.3, 2.0, and 2.1 and are compliant to SAE J2602
- Support Baud Rates up to 20 Kbaud with LIN-compatible output driver
- 43V load dump protected
- Very low EMI meets stringent OEM requirements
- Very high ESD immunity >20kV on VBB (IEC 61000-4-2) >14kV on LBUS (IEC 61000-4-2)
- >20kV on VBB (IEC 61000-4-2)
- >14kV on LBUS (IEC 61000-4-2)
- Very high immunity to RF disturbances meets stringent OEM requirements
- Wide supply voltage, 6.0V - 27.0V continuous
- Extended Temperature Range: -40 to +125°C
- Interface to PIC® EUSART and standard USARTs
- Local Interconnect Network (LIN) bus pin: Internal pull-up resistor and diode Protected against battery shorts Protected against loss of ground High current drive
- Internal pull-up resistor and diode
- Protected against battery shorts
- Protected against loss of ground
- High current drive
- Automatic thermal shutdown
- Low-power mode: Receiver monitoring bus and Transmitter off, (~ 5 µA)
- Receiver monitoring bus and Transmitter off, (~ 5 µA)
| Parameter|
Parameter Name
Value
| Value | |
Description
LIN Transceiver
|
LIN Transceiver
| |
Max. Baud Rate (kBaud)
20
|
20
| |
Vcc Range (V)
6 to 27
|
6 to 27
|
|
Documents
Ordering Information
| Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
|---|
| MCP2003A-E/MD | 8 | DFN | -40C to +125C | TUBE | 0.87 | 0.72 | 0.66 | 0.64 | 0.63 |
| MCP2003A-E/P | 8 | PDIP | -40C to +125C | TUBE | 0.82 | 0.69 | 0.62 | 0.60 | 0.60 |
| MCP2003A-E/SN | 8 | SOIC | -40C to +125C | TUBE | 0.82 | 0.69 | 0.62 | 0.60 | 0.60 |
| MCP2003AT-E/MD | 8 | DFN | -40C to +125C | T/R | 0.87 | 0.72 | 0.66 | 0.64 | 0.63 |
| MCP2003AT-E/SN | 8 | SOIC | -40C to +125C | T/R | 0.82 | 0.69 | 0.62 | 0.60 | 0.60 |
Similar Devices
| Product | Vcc Range | Vreg Output Voltage V | LIN Spec Supported | Price5K |
|---|
| MCP2003 | 6 - 27 | | 1.3, 2.0, 2.1, SAEJ2602 | $0.64 |
| MCP2003A | 6 - 27 | | 1.3, 2.0, 2.1, SAEJ2602 | $0.60 |
| MCP2003B | 6 - 30 | - | 1.3, 2.0, 2.1, SAEJ2602, ISO17987 | $0.49 |
| MCP2004 | 6 - 27 | | 1.3, 2.0, 2.1, SAEJ2602 | $0.64 |
| MCP2004A | 6 - 27 | | 1.3, 2.0, 2.1, SAEJ2602 | $0.60 |
| MCP2021 | 5.5 - 18 | 3.3 - 5.0 | Rev 1.3, 2.0, 2.1, SAE J2602 | $0.91 |
| MCP2021A | 6 - 18 | 3.3 - 5.0 | 1.3, 2.0, 2.1, SAE J2602 | $0.89 |
| MCP2022 | 5.5 - 18 | 3.3 - 5.0 | Rev 1.3, 2.0, 2.1, SAE J2602 | $1.01 |
| MCP2022A | 6 - 18 | 3.3 - 5.0 | 1.3, 2.0, 2.1, SAE J2602 | $0.89 |
| MCP2025 | 6 - 18 | 3.3 - 5.0 | 1.3, 2.0, 2.1, SAE J2602 | $0.89 |
| MCP2050 | 6 - 18 | 3.3 - 5.0 | 1.3, 2.0, 2.1, SAE J2602 | $1.05 |
RoHS Information
| PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
|---|
| MCP2003A-E/P | 0.486700 | 0.900000 | 8 | PDIP | .300in | Matte Tin | e3 |  |  |
| MCP2003AT-E/SN | 0.078000 | 0.230303 | 8 | SOIC | .150In(3.90mm) | Matte Tin | e3 | | |
| MCP2003A-E/SN | 0.078000 | 0.160000 | 8 | SOIC | .150In(3.90mm) | Matte Tin | e3 | | |
| MCP2003A-E/SNVAO | 0.078000 | 0.160000 | 8 | SOIC | .150In(3.90mm) | Matte Tin | e3 | | |
| MCP2003AT-E/SNVAO | 0.078000 | 0.230303 | 8 | SOIC | .150In(3.90mm) | Matte Tin | e3 | | |
| MCP2003AT-E/MD | 0.043200 | 0.212121 | 8 | DFN | 4x4x0.9mm | Matte Tin | e3 | | |
| MCP2003A-E/MD | 0.043200 | 0.076923 | 8 | DFN | 4x4x0.9mm | Matte Tin | e3 | | |
