MCP2004A _ BDTIC a Leading Distributor in China

MCP2004A

Stand-alone LIN Transceiver -- MCP200X family members; 8-pin PDIP, DFN and SOIC packages - MCP2003/3A-LIN-compatible driver with WAKE pin -- MCP2004/4A-LIN-compatible driver with FAULT/TXE pin. -- This device provides a bidirectional, half-duplex communication physical interface to automotive, and industrial LIN systems to meet the LIN bus specification Revision 2.1 and SAE J2602. The device is short circuit and overtemp protected by internal circuitry. The device has been specifically designed to operate in the automotive operating environment and will survive all specified transient conditions while meeting all of the stringent quiescent current requirements.

Features

The MCP2003/3A and MCP2004/4A are compliant with LIN Bus Specifications 1.3, 2.0, and 2.1 and are compliant to SAE J2602
Support Baud Rates up to 20 Kbaud with LIN-compatible output driver
43V load dump protected
Very low EMI meets stringent OEM requirements
Very high ESD immunity >20kV on VBB (IEC 61000-4-2) >14kV on LBUS (IEC 61000-4-2)
>20kV on VBB (IEC 61000-4-2)
>14kV on LBUS (IEC 61000-4-2)
Very high immunity to RF disturbances meets stringent OEM requirements
Wide supply voltage, 6.0V - 27.0V continuous
Extended Temperature Range: -40 to +125°C
Interface to PIC® EUSART and standard USARTs
Local Interconnect Network (LIN) bus pin: Internal pull-up resistor and diode Protected against battery shorts Protected against loss of ground High current drive
Internal pull-up resistor and diode
Protected against battery shorts
Protected against loss of ground
High current drive
Automatic thermal shutdown
Low-power mode: Receiver monitoring bus and Transmitter off, (~ 5 µA)
Receiver monitoring bus and Transmitter off, (~ 5 µA)

Parameter

Parameter Name Value	Value
Description LIN Transceiver	LIN Transceiver
Max. Baud Rate (kBaud) 20	20
Vcc Range (V) 6 to 27	6 to 27

Documents

MCP2003/MCP2004/MCP2003A/MCP2004A Data Sheet	Data Sheets	11/12/2014	618KB

Ordering Information

Part Number	Leads	Package Type	Temp Range	Packing	1+	26+	100+	1000+	5000+
MCP2004A-E/MD	8	DFN	-40C to +125C	TUBE	0.87	0.72	0.66	0.64	0.63
MCP2004A-E/P	8	PDIP	-40C to +125C	TUBE	0.82	0.69	0.62	0.60	0.60
MCP2004A-E/SN	8	SOIC	-40C to +125C	TUBE	0.82	0.69	0.62	0.60	0.60
MCP2004AT-E/MD	8	DFN	-40C to +125C	T/R	0.87	0.72	0.66	0.64	0.63
MCP2004AT-E/SN	8	SOIC	-40C to +125C	T/R	0.82	0.69	0.62	0.60	0.60

Similar Devices

Product	Vcc Range	Vreg Output Voltage V	LIN Spec Supported	Price5K
MCP2003	6 - 27		1.3, 2.0, 2.1, SAEJ2602	$0.64
MCP2003A	6 - 27		1.3, 2.0, 2.1, SAEJ2602	$0.60
MCP2003B	6 - 30	-	1.3, 2.0, 2.1, SAEJ2602, ISO17987	$0.49
MCP2004	6 - 27		1.3, 2.0, 2.1, SAEJ2602	$0.64
MCP2004A	6 - 27		1.3, 2.0, 2.1, SAEJ2602	$0.60
MCP2021	5.5 - 18	3.3 - 5.0	Rev 1.3, 2.0, 2.1, SAE J2602	$0.91
MCP2021A	6 - 18	3.3 - 5.0	1.3, 2.0, 2.1, SAE J2602	$0.89
MCP2022	5.5 - 18	3.3 - 5.0	Rev 1.3, 2.0, 2.1, SAE J2602	$1.01
MCP2022A	6 - 18	3.3 - 5.0	1.3, 2.0, 2.1, SAE J2602	$0.89
MCP2025	6 - 18	3.3 - 5.0	1.3, 2.0, 2.1, SAE J2602	$0.89
MCP2050	6 - 18	3.3 - 5.0	1.3, 2.0, 2.1, SAE J2602	$1.05

RoHS Information

PartNumber	DeviceWeight	ShippingWeight	LeadCount	PackageType	PackageWidth	SolderComposition	JEDECIndicator
MCP2004A-E/P	0.486700	0.900000	8	PDIP	.300in	Matte Tin	e3
MCP2004AT-E/SN	0.078000	0.230303	8	SOIC	.150In(3.90mm)	Matte Tin	e3
MCP2004A-E/SN	0.078000	0.160000	8	SOIC	.150In(3.90mm)	Matte Tin	e3
MCP2004A-E/SNVAO	0.078000	0.160000	8	SOIC	.150In(3.90mm)	Matte Tin	e3
MCP2004AT-E/SNVAO	0.078000	0.230303	8	SOIC	.150In(3.90mm)	Matte Tin	e3
MCP2004AT-E/MD	0.043200	0.212121	8	DFN	4x4x0.9mm	Matte Tin	e3
MCP2004A-E/MD	0.043200	0.076923	8	DFN	4x4x0.9mm	Matte Tin	e3

MCP2003/MCP2004/MCP2003A/MCP2004A Data Sheet MCP2004A